1125988 Phoenix Contact Control Relays

Product Details

• Mains frequency
  50/60 Hz
• Type of note
  Notes on operation
• Width
  6.2 mm
• Ambient temperature (storage/transport)
  -40 °C ... 85 °C
• Typical response time
  7 ms
• Utilization restriction
  EMC: class A product, see manufacturer's declaration in the download area
• Depth
  94 mm
• Maximum altitude
  ≤ 2000 m
• Nominal input voltage UN
  120 V AC
• Typical input current at UN
  7 mA (50 Hz)
• Protective circuit
  Bridge rectifier
• Contact type
  1 changeover contact
• Contact material
  AgSnO
• Min. switching current
  10 mA (12 V)
• Switching capacity min.
  0.12 W
• Operating mode
  100% operating factor
• Mounting position
  any
• Stripping length
  8 mm
• Conductor cross section solid
  0.14 mm² ... 2.5 mm²
• Standards/regulations
  DIN EN 50178
Pollution degree
2
REACh SVHC
Lead 7439-92-1
ECLASS 10.0.1
27371601
Note
The system installer must ensure the touch protection of the product (at voltages > 25 V AC/60 V DC). The product is a built-in device without protection against direct contact.
Height
80 mm
Ambient temperature (operation)
-40 °C ... 55 °C
Degree of protection
RT III (Relay)
Typical release voltage
50 V AC
Coil voltage
60 V DC
Maximum switching voltage
250 V AC/DC
Maximum inrush current
10 A (4 s)
Limiting continuous current
6 A
Test voltage
4 kVrms (50 Hz, 1 min., winding/contact)
Mechanical service life
2x 107 cycles
Connection method
Push-in connection
Conductor cross section AWG
26 ... 14
Designation
Corrosive gas test
Rated surge voltage
6 kV
Overvoltage category
III
ECLASS 11.0
27371601
ECLASS 9.0
27371601
Typical release time
20 ms
Status display
Yellow LED
Type of switch contact
Single contact
Minimum switching voltage
5 V (100 mA)
Interrupting rating (ohmic load) max.
140 W (24 V DC)
Switching capacity
2 A (at 24 V, DC13)
Assembly instructions
In rows with zero spacing
Connection name
Contact side
Conductor cross section flexible
0.14 mm² ... 2.5 mm²
Rated insulation voltage
250 V AC
Insulation
Safe isolation, reinforced insulation
Identification
ISA-S71.04. G3 Harsh Group
China RoHS
Environmentally friendly use period: unlimited = EFUP-e