1125985 Phoenix Contact Control Relays

Product Details

• Utilization restriction
  EMC: class A product, see manufacturer's declaration in the download area
• Ambient temperature (operation)
  -40 °C ... 55 °C
• Degree of protection
  RT III (Relay)
• Typical release voltage
  50 V AC
• Type of switch contact
  Single contact
• Limiting continuous current
  6 A
• Test voltage
  4 kVrms (50 Hz, 1 min., winding/contact)
• Mains frequency
  50/60 Hz
• Coil voltage
  110 V DC
• Maximum switching voltage
  250 V AC/DC
• Minimum switching voltage
  5 V (10 mA)
• Operating mode
  100% operating factor
• Mounting position
  any
• Conductor cross section solid
  0.14 mm² ... 2.5 mm²
• Rated insulation voltage
  250 V AC
• China RoHS
  Environmentally friendly use period: unlimited = EFUP-e
• Type of note
  Notes on operation
• Ambient temperature (storage/transport)
  -40 °C ... 85 °C
• Maximum altitude
  ≤ 2000 m
• Typical response time
  7 ms
Protective circuit
Bridge rectifier
Contact material
AgNi
Interrupting rating (ohmic load) max.
144 W (24 V DC)
Mechanical service life
3x 107 cycles
Connection name
Contact side
Stripping length
8 mm
Conductor cross section AWG
26 ... 14
Rated surge voltage
4 kV (Safe isolation, reinforced insulation, and 6 kV between input circuit and output contact current paths)
ECLASS 11.0
27371601
Width
14 mm
Depth
94 mm
Typical release time
10 ms
Contact type
2 changeover contacts
Maximum inrush current
15 A (300 ms)
Switching capacity
2 A (at 24 V, DC13)
Screw thread
M3
Standards/regulations
DIN EN 50178
Identification
ISA-S71.04. G3 Harsh Group
ECLASS 9.0
27371601
Note
The system installer must ensure the touch protection of the product (at voltages > 25 V AC/60 V DC). The product is a built-in device without protection against direct contact.
Height
80 mm
Nominal input voltage UN
120 V AC
Typical input current at UN
6 mA (50 Hz)
Status display
Yellow LED
Min. switching current
10 mA (5 V)
Switching capacity min.
0.12 W
Assembly instructions
In rows with zero spacing
Designation
Corrosive gas test
Pollution degree
2
Overvoltage category
III
ECLASS 10.0.1
27371601
Connection method
Screw connection
Conductor cross section flexible
0.14 mm² ... 2.5 mm²
Insulation
Basic insulation
REACh SVHC
Lead 7439-92-1