1111634 Phoenix Contact AC/DC Power Supplies

Product Details

• Height
  240 mm
• Ambient temperature (operation)
  -25 °C ... 70 °C (Derating >60°C: 2.5 %/K)
• Max. permissible relative humidity (operation)
  ≤ 100 % (at 25 °C, non-condensing)
• Permissible humidity (operation)
  ≤ 100 % (at 25 °C, non-condensing)
• Discharge current to PE
  < 3.5 mA
• Inrush current
  ≤ 25 A (typical)
• Mains buffering time
  > 15 ms (120 V AC)
• Nominal output voltage
  24 V DC ±1 %
• Connection in series
  No
• Residual ripple
  ≤ 10 mVPP
• Power loss nominal load max.
  < 22 W (120 V AC)
• Insulation voltage input/output
  3 kV AC (type test)
• Type of locking
  M12 screw locking
• Standard designation
  Degrees of protection provided by enclosures (IP code)
• Conducted noise emission
  EN 55016
• Electromagnetic HF field
  EN 61000-4-3
• Fast transients (burst)
  EN 61000-4-4
• Voltage dips
  EN 61000-4-11
• Voltage dip
  0 %
• Criterion B
  Temporary impairment to operational behavior that is corrected by the device itself.
Inflammability class in acc. with UL 94 (housing / terminal blocks)
V0
Degree of pollution
3
Input voltage range
100 V AC ... 240 V AC 10 %
Nominal power consumption
285 VA
Type of protection
Transient surge protection
Dynamic Boost (IDyn.Boost)
15 A (5 s)
Feedback voltage resistance
≤ 35 V DC
Maximum power dissipation in no-load condition
< 10 W (120 V AC)
Assembly instructions
Alignable: 20 mm horizontally, 50 mm vertically above, 100 mm vertically below
Electromagnetic compatibility
Conformance with EMC Directive 2014/30/EU
Comments
Criterion A
Output
1 kV (Test Level 3 - symmetrical)
Frequency
50 Hz
REACh SVHC
Lead 7439-92-1
Width
136 mm
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Dielectric strength maximum
≤ 300 V AC 15 s
Current consumption
2.8 A (100 V AC)
Power factor (cos phi)
0.93
Connection in parallel
no
Output power
240 W
MTBF (IEC 61709, SN 29500)
> 1800000 h (25 °C)
Connection method
M12 circular connector
Low Voltage Directive
Conformance with Low Voltage Directive 2014/35/EC
Contact discharge
6 kV (Test Level 3)
Electrostatic discharge
EN 61000-4-2
Signal
1 kV (Test Level 2 - asymmetrical)
Conducted interference
EN 61000-4-6
Criterion A
Normal operating behavior within the specified limits.
Degree of protection
IP67
Installation height
≤ 4000 m (> 2000 m, Derating: 10 %/1000 m)
Nominal input voltage range
100 V AC ... 240 V AC
Frequency range (fN)
50 Hz ... 60 Hz ±10 %
Protective circuit/component
Varistor
Nominal output current (IN)
10 A
Control deviation
< 1 % (change in load, static 10 % ... 90 %)
Net weight
1.5 kg
Range of positions
4 Socket
Noise emission
EN 55016
Test field strength
10 V/m (Test Level 3)
Surge voltage load (surge)
EN 61000-4-5
Criterion C
Temporary adverse effects on the operating behavior, which the device corrects automatically or which can be restored by actuating the operating elements.
Depth
53 mm
Ambient temperature (start-up type tested)
-25 °C
Climatic class
3K3 (in acc. with EN 60721)
AC frequency range
50 Hz ... 60 Hz ±10 %
Recommended breaker for input protection
6 A ... 16 A (US/CAN: branch circuit protection < 20 A) (Characteristic B, C, D, K or comparable)
Input fuse
6.3 A (internal (device protection))
Derating
> 60 °C ... 70 °C (2.5%/K)
Protection against overvoltage at the output (OVP)
≤ 30 V DC
Efficiency
typ. 91 % (120 V AC)
Protection class
I
Coding
L-coded
Standards/regulations
EN/IEC 60529
Harmonic currents
EN 61000-3-2
Frequency range
0.15 MHz ... 80 MHz
Input
2 kV (Test Level 4 - symmetrical)
Voltage
230 V AC
Number of periods
1 period
ECLASS 9.0
27040701