1107015 Phoenix Contact Electrical Wires & Cables

Product Details

• Type
  DC charging cable
• Charging standard
  CCS type 2
• Width
  75 mm (Vehicle charging connector)
• Degree of protection
  IP44 (plugged in; when plugged in and ready to operate, the degree of protection is only ensued if both plug-in components are original products from Phoenix Contact or suitable standard-compliant products)
• Rated current of power contacts
  200 A
• Resistor coding
  1500 Ω (between PE and PP)
• Withdrawal force
  < 100 N
• Label
  14.1 mm x 44.8 mm (customer logo on request)
• Cable structure
  2 x 50 mm² + 1 x 25 mm² + 3 x 2 x 0.75 mm²
• Wiring standards/regulations
  prEN 50620 / DIN EN 50620
• Outer sheath, material
  TPE-U
• Long-term stability (max. R0-Drift)
  0.06 % (After 1000 hours at 130°C)
• ECLASS 11.0
  27144705
• Affixed logo
  “PHOENIX CONTACT” logo
• Charging mode
  Mode 4
• Ambient temperature (storage/transport)
  -40 °C ... 80 °C
• Maximum charging power
  200 kW
• Rated voltage for signal contacts
  30 V AC
• Insertion/withdrawal cycles
  > 10000
• Material handle area
  Plastic
Flammability rating
V0
Wiring certifications
VDE-Reg. 8798
Recommended measured current
1 mA (1 V at 0°C)
Temperature range
-50 °C ... 130 °C
ECLASS 10.0.1
27144705
Design
D-Line 1.1
Stripping length
140 mm ±10 mm
Number of power contacts
3 (PE, DC+, DC-)
Rated current for signal contacts
2 A
Insertion force
< 100 N
Mating face color
black
Wiring class
Class 6
External sheath, color
black
Cable weight
max. 1620 kg/km
Tolerance at the sensor with the recommended measured current
±1K
Shutdown temperature
90 °C equivalent to a Pt 1000 value of 1346.5 Ω
Application
For charging electric vehicles (EV) with direct current (DC)
Height
139 mm (Vehicle charging connector)
Conductor length
3 m
Max. altitude
5000 m (above sea level)
Number of signal contacts
2 (CP, PP)
Type of signal transmission
Pulse width modulation with modulated Powerline communication according to ISO/IEC 15118 / DIN SPEC 70121
Note on the connection method
Crimp connection, cannot be disconnected
Housing color
black
Design line
Standard
Housing material
Plastic
External cable diameter
28.1 mm ±0.5 mm
Type of sensor
Pt 1000
Temperature coefficient (TCR)
3850 ppm/K
REACh SVHC
Lead 7439-92-1
Standards/regulations
DIN EN 60751
Depth
267 mm (Vehicle charging connector)
Ambient temperature (operation)
-30 °C ... 50 °C
Rated voltage for power contacts
1000 V DC
Temperature monitoring
2x Pt 1000
Color handle area
black
Material mating face
Plastic
Cable resistance
≤ 0.00039 Ω/m (based on a power core, at an ambient temperature of 20°C)
Type of conductor
straight
Minimum bending radius
281 mm (10 x diameter)
China RoHS
Environmentally Friendly Use Period = 10;
ECLASS 9.0
27144705