1106946 Phoenix Contact Electrical Wires & Cables

Product Details

• Design
  D-Line 1.1
• Application
  For charging electric vehicles (EV) with direct current (DC)
• Charging standard
  CCS type 2
• Ambient temperature (storage/transport)
  -40 °C ... 80 °C
• Standards/regulations
  DIN EN 60751
• Width
  75 mm (Vehicle charging connector)
• Depth
  267 mm (Vehicle charging connector)
• Maximum charging power
  80 kW
• Rated voltage for power contacts
  1000 V DC
• Note on the connection method
  Crimp connection, cannot be disconnected
• Housing color
  black
• Material mating face
  Plastic
• Cable resistance
  ≤ 0.00121 Ω/m (based on a power core, at an ambient temperature of 20°C)
• Recommended measured current
  1 mA (1 V at 0°C)
• Type
  DC charging cable
• Normative cable length restrictions
  NOTE: Cable management may be required.
• Stripping length
  140 mm ±10 mm
• Degree of protection
  IP44 (plugged in; when plugged in and ready to operate, the degree of protection is only ensued if both plug-in components are original products from Phoenix Contact or suitable standard-compliant products)
• Rated current for signal contacts
  2 A
• Temperature monitoring
  2x Pt 1000
Resistor coding
1500 Ω (between PE and PP)
Color handle area
black
Housing material
Plastic
Outer sheath, material
TPE-U
Cable weight
max. 820 kg/km
Temperature coefficient (TCR)
3850 ppm/K
Affixed logo
“PHOENIX CONTACT” logo
Charging mode
Mode 4
Conductor length
7 m
Number of power contacts
3 (PE, DC+, DC-)
Number of signal contacts
2 (CP, PP)
Insertion force
< 100 N
Design line
Standard
Flammability rating
V0
Wiring class
Class 6
Type of conductor
straight
Minimum bending radius
212 mm (10 x diameter)
Shutdown temperature
90 °C equivalent to a Pt 1000 value of 1346.5 Ω
ECLASS 9.0
27144705
Height
139 mm (Vehicle charging connector)
Ambient temperature (operation)
-30 °C ... 50 °C
Max. altitude
5000 m (above sea level)
Type of signal transmission
Pulse width modulation with modulated Powerline communication according to ISO/IEC 15118 / DIN SPEC 70121
Withdrawal force
< 100 N
Label
14.1 mm x 44.8 mm (customer logo on request)
External cable diameter
21.2 mm ±0.4 mm
External sheath, color
black
Temperature range
-50 °C ... 130 °C
REACh SVHC
Lead 7439-92-1
Rated current of power contacts
80 A
Rated voltage for signal contacts
30 V AC
Insertion/withdrawal cycles
> 10000
Mating face color
black
Material handle area
Plastic
Cable structure
3 x 16 mm² + 3 x 2 x 0.75 mm²
Wiring standards/regulations
prEN 50620 / DIN EN 50620
Tolerance at the sensor with the recommended measured current
±1K
China RoHS
Environmentally Friendly Use Period = 10;
ECLASS 11.0
27144705
Type of sensor
Pt 1000
ECLASS 10.0.1
27144705
Long-term stability (max. R0-Drift)
0.06 % (After 1000 hours at 130°C)