1105523 Phoenix Contact Electrical Safety Devices

Product Details

• Depth
  113.6 mm
• Max. permissible humidity (storage/transport)
  95 % (non-condensing)
• Current consumption
  typ. 10 mA (typically with US)
• Inrush current
  max. 750 mA (Δt  1 s)
• Filter time
  250 ms ±2 ms (Test pulse rate > 500 ms)
• Description of the input
  IEC 61131-2 type 3
• Output name
  O1A, O1B, O2A, O2B
• Nominal output voltage
  24 V DC (Supply via A1)
• Leakage current
  max. 100 µA
• Switching frequency
  max. 1/4 x tCycle [Hz]
• Maximum inrush current
  1.1 A (Δt = 3 s  at Us)
• Output voltage range
  18.2 V DC ... 27.8 V DC (US - 1 V)
• Restart time
  min. 5 s (Boot time)
• Height
  107.74 mm
• Designation
  Air clearances and creepage distances between the power circuits
• Protective circuit
  Serial protection against polarity reversal
• Number of inputs
  2
• Max. permissible overall conductor resistance
  1.2 kΩ (Input and reset circuit at US)
• Protective circuit/component
  Suppressor diode
• Nominal output voltage range
  18 V DC ... 27.6 V DC (US - 1.2 V)
Ohmic load
min. 50 Ω (Observe limiting continuous current)
Discharging circuit
Yes, internal
Error detection time at 1-channel structure
< 3.5 s (OFF state)
Nominal voltage range
18.2 V DC ... 27.8 V DC (US - 1 V)
Mounting type
DIN rail mounting
Min. degree of protection of inst. location
IP54
Housing color
yellow
Stripping length
10 mm
Safety Integrity Level (SIL)
2
Safety Integrity Level Claim Limit (SIL CL)
3 (2-channel wiring)
Standards/regulations
EN 50178
ECLASS 11.0
27371819
ECLASS 9.0
27371819
Ambient temperature (operation)
-10 °C ... 55 °C (observe derating)
Max. permissible relative humidity (operation)
95 % (non-condensing)
Rated control supply current IS
typ. 40 mA (Outputs inactive)
Rated control circuit supply voltage US
24 V DC -20 % / +20 % (provide external protection, typically 8 A)
Input voltage range "0" signal
0 V DC ... 5 V DC
Input voltage range "1" signal
11 V DC ... 28.8 V DC
Input current range "0" signal
< 1 mA
Limiting continuous current
100 mA (per channel)
Output voltage when switched off
max. 0.1 V
Max. inductive load
max. 2.4 mH
Short-circuit protection
Yes (self-limitation at 1.1 A)
Response time
see user manual
Nominal operating mode
100% operating factor
Mounting position
vertical or horizontal
Housing material
Polyamide PA non-reinforced
Connection method
Push-in connection
Conductor cross-section AWG
24 ... 16
Performance level (PL)
e (2-channel wiring)
Vibration (operation)
10 Hz ... 150 Hz, 2g
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 10.0.1
27371819
Width
22.61 mm
Ambient temperature (storage/transport)
-20 °C ... 85 °C
Maximum altitude
≤ 2000 m (Above sea level)
Power consumption at US
typ. 0.96 W (Outputs inactive)
Input name
Reset inputs
Cable length
max. 100 m (per output)
Output description
PNP, IEC 61131-2 type 0.5
Number of outputs
4
Max. capacitive load
max. 470 nF
Test pulses
≤ 220 µs (Test pulse duration)
Voltage
24 V DC (via A1)
Cycle time
see user manual
Net weight
141 g
Degree of protection
IP20
Protection class
III (EN 50178)
Status display
1 x LED (green), 2 x LED (orange)
Conductor cross section flexible
0.2 mm² ... 2.5 mm²
Conductor cross section solid
0.2 mm² ... 2.5 mm²
Rated surge voltage/insulation
Basic insulation 4 kV between 24 V power supply and I/Os to the housing
Shock
10g for Δt = 16 ms (continuous shock, 1000 shocks in each space direction)
Conformance
CE-compliant
Assembly instructions
Observe derating
Operating voltage display
1 x green LED
Indication
2 x LED (red)
pluggable
Yes
Stop category
0
Rated insulation voltage
250 V AC
Degree of pollution
2
Overvoltage category
II