1105133 Phoenix Contact Electrical Safety Devices
Part#:1105133
Manufacturer:Phoenix Contact
Category:Electrical Safety Devices
Product Lifecycle:Active
Get a quick Quote!
Extension module with 8 signal outputs, TBUS interface, plug-in Push-in terminal block, TBUS connector included
About the manufacturer: Phoenix Contact is one of the manufacturers that offers Electrical Safety Devices that you can order at Power Resources International site. Phoenix Contact manufactures industrial electrical and electronic technology products that offer power, protection, connectivity, and automation for systems and equipment.
Check out the 1105133 Phoenix Contact price in the box on the right side or send a quick quote.
Product Details
- Depth 113.6 mm
- Ambient temperature (storage/transport) -20 °C ... 85 °C
- Inrush current 2 A (Δt = 1 ms at Us)
- Output description PNP, IEC 61131-2 Typ 0,1
- Switching frequency max. 1/4 x tCycle [Hz]
- Protective circuit/component Suppressor diode
- Restart time min. 5 s (Boot time)
- Min. degree of protection of inst. location IP54
- Status display 1 x LED (green), 2 x LED (orange)
- Connection method Push-in connection
- Conductor cross section solid 0.2 mm² ... 2.5 mm²
- China RoHS Environmentally friendly use period: unlimited = EFUP-e
- Ambient temperature (operation) -10 °C ... 55 °C (observe derating)
- Maximum altitude ≤ 2000 m (Above sea level)
- Protective circuit Inverse-parallel protection against polarity reversal
- Output voltage range 18.2 V DC ... 27.8 V DC (US - 1 V)
- Limiting continuous current 100 mA (per channel)
- Leakage current max. 100 µA
- Response time see user manual
- Degree of protection IP20
- Protection class III (EN 50178)
- Stripping length 10 mm
- Rated insulation voltage 250 V AC
- Shock 10g for Δt = 16 ms (continuous shock, 1000 shocks in each space direction)
- Height 107.74 mm
- Designation Air clearances and creepage distances between the power circuits
- Filter time typ. 1 ms (in the event of voltage dips)
- Number of outputs 8
- Maximum inrush current 1.1 A (Δt = 3 s at Us)
- Cable length max. 100 m (per output)
- Nominal operating mode 100% operating factor
- Mounting type DIN rail mounting
- Operating voltage display 1 x green LED
- Conductor cross-section AWG 24 ... 16
- Rated surge voltage/insulation Basic insulation 4 kV between all current paths and housing
- Vibration (operation) 10 Hz ... 150 Hz, 2g
- ECLASS 9.0 27371819
- Width 22.61 mm
- Max. permissible relative humidity (operation) 95 % (non-condensing)
- Rated control circuit supply voltage US 24 V DC -20 % / +20 % (external fuse, typically 4 A)
- Description Output supply
- Current consumption max. 0.82 A (For US = 24 V, A2 and full load)
- Short-circuit protection Yes (self-limitation at 1.1 A)
- Mounting position vertical or horizontal
- Housing material Polyamide PA non-reinforced
- Housing color yellow
- pluggable Yes
- Degree of pollution 2
- ECLASS 10.0.1 27371819
- Max. permissible humidity (storage/transport) 95 % (non-condensing)
- Power consumption at US typ. 0.48 W
- Rated control supply current IS typ. 20 mA (Outputs active, without load)
- Voltage 24 V DC (via 24 V)
- Output voltage when switched off max. 0.1 V
- Net weight 126 g
- Assembly instructions Observe derating
- Indication 2 x LED (red)
- Conductor cross section flexible 0.2 mm² ... 2.5 mm²
- Standards/regulations EN 50178
- Overvoltage category II
- ECLASS 11.0 27371819
Product condition
New Factory Sealed
New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.
Manufacturer warranty
Request a quote, and we will send you price and availability within minutes.
Select Qty:
Average response time: 11 minutes
Fast Shipping & Delivery
Secure Payment Processing
Warranty
Responsive Customer Support
Need more details?
Feel free to chat with us
What can I help you find today?