1094758 Phoenix Contact Control Relays

Product Details

• Width
  6.2 mm
• Ambient temperature (operation)
  -25 °C ... 60 °C
• Voltage range with reference to US
  0.8 ... 1.2
• Nominal input voltage UN
  24 V DC
• Input voltage range in reference to UN
  0.8 ... 1.2
• Contact type
  Single contact, 1 N/O contact
• Limiting continuous current
  0.75 A
• Min. switching current
  10 mA
• Output circuit
  2-conductor, floating
• Leakage current
  < 1 mA
• Stripping length
  10 mm
• Designation
  Corrosive gas test
• Pollution degree
  2
• ECLASS 10.0.1
  27371603
• China RoHS
  Environmentally Friendly Use Period = 50 years
• Note
  If the specified maximum values are exceeded, the gold plating is destroyed. The maximum values of the power contact relay are then valid. This can result in a shorter service life than with a pure power contact.
• Depth
  94 mm
• Ambient temperature (storage/transport)
  -40 °C ... 85 °C
• Rated control circuit supply voltage US
  24 V DC
• Rated actuating current IC
  1 mA
Status display
Yellow LED
Maximum switching voltage
253 V AC (Partition plate PLC-ATP must be installed for voltages larger than 250 V (L1, L2, L3) between identical terminal points in adjacent modules. Potential bridging is then carried out with FBST 8-PLC... or ...FBST 500...)
Maximum inrush current
30 A (10 ms)
Switching capacity min.
120 mW
Voltage drop at max. limiting continuous current
< 1 V
Color
gray
Connection method
Push-in connection
Conductor cross section AWG
26 ... 14
Rated insulation voltage
250 V AC
Insulation
Safe isolation, reinforced insulation
REACh SVHC
Lead 7439-92-1
Protective circuit
RCV circuit
Operating mode
100% operating factor
Assembly instructions
In rows with zero spacing
Conductor cross section flexible
0.14 mm² ... 2.5 mm²
Standards/regulations
DIN EN 50178
Identification
ISA-S71.04. G3 Harsh Group
ECLASS 9.0
27371603
Connection name
Output side
Type of note
Notes on operation
Height
80 mm
Maximum altitude
≤ 2000 m
Degree of protection
IP20
Rated control supply current IS
≥ 8 mA (depends on type)
Surge voltage protection
> 33 V
Fitting of components
OPT-24DC/230AC/1
Contact material
AgSnO
Minimum switching voltage
24 V AC
Interrupting rating (ohmic load) max.
140 W (at 24 V DC)
Max. load value
4.5 A2s
Mounting position
any
Conductor cross section solid
0.14 mm² ... 2.5 mm²
Rated surge voltage
6 kV
Overvoltage category
III
ECLASS 11.0
27371603