1094757 Phoenix Contact Control Relays

Product Details

• Note
  If the specified maximum values are exceeded, the gold plating is destroyed. The maximum values of the power contact relay are then valid. This can result in a shorter service life than with a pure power contact.
• Width
  6.2 mm
• Height
  80 mm
• Rated control supply current IS
  ≥ 8 mA (depends on type)
• Rated actuating current IC
  1 mA
• Contact material
  AgSnO
• Limiting continuous current
  0.75 A
• Maximum inrush current
  30 A (10 ms)
• Type of note
  Notes on operation
• Depth
  94 mm
• Maximum altitude
  ≤ 2000 m
• Rated control circuit supply voltage US
  24 V DC
• Input voltage range in reference to UN
  0.8 ... 1.2
• Ambient temperature (operation)
  -25 °C ... 60 °C
• Degree of protection
  IP20
• Nominal input voltage UN
  12 V DC
• Contact type
  Single contact, 1 N/O contact
• Minimum switching voltage
  24 V AC
• Switching capacity min.
  120 mW
• Output circuit
  2-conductor, floating
Color
gray
Connection name
Output side
Rated surge voltage
6 kV
Overvoltage category
III
REACh SVHC
Lead 7439-92-1
Designation
Corrosive gas test
Standards/regulations
DIN EN 50178
Pollution degree
2
ECLASS 11.0
27371603
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Voltage range with reference to US
0.8 ... 1.2
Surge voltage protection
> 33 V
Status display
Yellow LED
Maximum switching voltage
253 V AC (Partition plate PLC-ATP must be installed for voltages larger than 250 V (L1, L2, L3) between identical terminal points in adjacent modules. Potential bridging is then carried out with FBST 8-PLC... or ...FBST 500...)
Interrupting rating (ohmic load) max.
140 W (at 24 V DC)
Leakage current
< 1 mA
Operating mode
100% operating factor
Stripping length
10 mm
Conductor cross section solid
0.14 mm² ... 2.5 mm²
Identification
ISA-S71.04. G3 Harsh Group
China RoHS
Environmentally Friendly Use Period = 50 years
Fitting of components
OPT-24DC/230AC/1
Min. switching current
10 mA
Protective circuit
RCV circuit
Max. load value
4.5 A2s
Mounting position
any
Connection method
Push-in connection
Conductor cross section AWG
26 ... 14
ECLASS 10.0.1
27371603
Voltage drop at max. limiting continuous current
< 1 V
Assembly instructions
In rows with zero spacing
Conductor cross section flexible
0.14 mm² ... 2.5 mm²
Rated insulation voltage
250 V AC
Insulation
Safe isolation, reinforced insulation
ECLASS 9.0
27371603