1094755 Phoenix Contact Control Relays

Product Details

• Height
  80 mm
• Ambient temperature (storage/transport)
  -40 °C ... 85 °C
• Degree of protection
  IP20
• Rated actuating current IC
  1 mA
• Input voltage range in reference to UN
  0.9 ... 1.2
• Contact type
  Single contact, 1 N/O contact
• Minimum switching voltage
  24 V AC
• Limiting continuous current
  0.75 A
• Output circuit
  2-conductor, floating
• Max. load value
  4.5 A2s
• Leakage current
  < 1 mA
• Conductor cross section flexible
  0.14 mm² ... 2.5 mm²
• Conductor cross section AWG
  26 ... 14
• Insulation
  Safe isolation, reinforced insulation
• REACh SVHC
  Lead 7439-92-1
• Depth
  94 mm
• Maximum altitude
  ≤ 2000 m
• Voltage range with reference to US
  0.8 ... 1.2
• Surge voltage protection
  > 33 V
• Contact material
  AgSnO
Ambient temperature (operation)
-25 °C ... 60 °C
Note
If the specified maximum values are exceeded, the gold plating is destroyed. The maximum values of the power contact relay are then valid. This can result in a shorter service life than with a pure power contact.
Nominal input voltage UN
5 V DC
Status display
Yellow LED
Fitting of components
OPT-24DC/230AC/1
Interrupting rating (ohmic load) max.
140 W (at 24 V DC)
Voltage drop at max. limiting continuous current
< 1 V
Operating mode
100% operating factor
Stripping length
10 mm
Rated insulation voltage
250 V AC
Rated surge voltage
6 kV
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 11.0
27371603
Width
6.2 mm
Type of note
Notes on operation
Rated control supply current IS
≥ 8 mA (depends on type)
Rated control circuit supply voltage US
24 V DC
Maximum switching voltage
253 V AC (Partition plate PLC-ATP must be installed for voltages larger than 250 V (L1, L2, L3) between identical terminal points in adjacent modules. Potential bridging is then carried out with FBST 8-PLC... or ...FBST 500...)
Min. switching current
10 mA
Protective circuit
RCV circuit
Mounting position
any
Connection name
Output side
Conductor cross section solid
0.14 mm² ... 2.5 mm²
Pollution degree
2
ECLASS 10.0.1
27371603
Maximum inrush current
30 A (10 ms)
Switching capacity min.
120 mW
Color
gray
Assembly instructions
In rows with zero spacing
Connection method
Push-in connection
Standards/regulations
DIN EN 50178
Designation
Corrosive gas test
Identification
ISA-S71.04. G3 Harsh Group
Overvoltage category
III
ECLASS 9.0
27371603