1094753 Phoenix Contact Control Relays

Product Details

• Width
  6.2 mm
• Maximum altitude
  ≤ 2000 m
• Input voltage range in reference to UN
  0.8 ... 1.2
• Minimum switching voltage
  24 V AC
• Maximum inrush current
  30 A (10 ms)
• Output circuit
  2-conductor, floating
• Assembly instructions
  In rows with zero spacing
• Connection name
  Output side
• Standards/regulations
  DIN EN 50178
• Insulation
  Safe isolation, reinforced insulation
• ECLASS 9.0
  27371603
• Depth
  94 mm
• Ambient temperature (storage/transport)
  -40 °C ... 85 °C
• Rated control circuit supply voltage US
  24 V DC
• Rated actuating current IC
  1 mA
• Fitting of components
  OPT-24DC/230AC/1
• Interrupting rating (ohmic load) max.
  140 W (at 24 V DC)
• Protective circuit
  RCV circuit
• Mounting position
  any
• Connection method
  Screw connection
Conductor cross section AWG
26 ... 14
Designation
Corrosive gas test
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 10.0.1
27371603
Note
If the specified maximum values are exceeded, the gold plating is destroyed. The maximum values of the power contact relay are then valid. This can result in a shorter service life than with a pure power contact.
Height
80 mm
Nominal input voltage UN
24 V DC
Status display
Yellow LED
Contact type
Single contact, 1 N/O contact
Contact material
AgSnO
Switching capacity min.
120 mW
Leakage current
< 1 mA
Stripping length
8 mm
Screw thread
M3
Overvoltage category
III
ECLASS 11.0
27371603
Type of note
Notes on operation
Degree of protection
IP20
Voltage range with reference to US
0.8 ... 1.2
Maximum switching voltage
253 V AC (Partition plate PLC-ATP must be installed for voltages larger than 250 V (L1, L2, L3) between identical terminal points in adjacent modules. Potential bridging is then carried out with FBST 8-PLC... or ...FBST 500...)
Min. switching current
10 mA
Voltage drop at max. limiting continuous current
< 1 V
Color
gray
Conductor cross section flexible
0.14 mm² ... 2.5 mm²
Rated insulation voltage
250 V AC
Pollution degree
2
Ambient temperature (operation)
-25 °C ... 60 °C
Rated control supply current IS
≥ 8 mA (depends on type)
Surge voltage protection
> 33 V
Limiting continuous current
0.75 A
Max. load value
4.5 A2s
Operating mode
100% operating factor
Conductor cross section solid
0.14 mm² ... 2.5 mm²
Rated surge voltage
6 kV
Identification
ISA-S71.04. G3 Harsh Group
REACh SVHC
Lead 7439-92-1