1094752 Phoenix Contact Control Relays

Product Details

• Width
  6.2 mm
• Voltage range with reference to US
  0.8 ... 1.2
• Type of note
  Notes on operation
• Depth
  94 mm
• Degree of protection
  IP20
• Nominal input voltage UN
  12 V DC
• Contact type
  Single contact, 1 N/O contact
• Limiting continuous current
  0.75 A
• Interrupting rating (ohmic load) max.
  140 W (at 24 V DC)
• Switching capacity min.
  120 mW
• Color
  gray
• Mounting position
  any
• Conductor cross section solid
  0.14 mm² ... 2.5 mm²
• Rated insulation voltage
  250 V AC
• Pollution degree
  2
• Height
  80 mm
• Ambient temperature (storage/transport)
  -40 °C ... 85 °C
• Rated control circuit supply voltage US
  24 V DC
• Surge voltage protection
  > 33 V
• Status display
  Yellow LED
Minimum switching voltage
24 V AC
Maximum inrush current
30 A (10 ms)
Output circuit
2-conductor, floating
Operating mode
100% operating factor
Connection name
Output side
Conductor cross section AWG
26 ... 14
Standards/regulations
DIN EN 50178
Insulation
Safe isolation, reinforced insulation
Identification
ISA-S71.04. G3 Harsh Group
Note
If the specified maximum values are exceeded, the gold plating is destroyed. The maximum values of the power contact relay are then valid. This can result in a shorter service life than with a pure power contact.
Ambient temperature (operation)
-25 °C ... 60 °C
Maximum altitude
≤ 2000 m
Rated control supply current IS
≥ 8 mA (depends on type)
Input voltage range in reference to UN
0.8 ... 1.2
Fitting of components
OPT-24DC/230AC/1
Maximum switching voltage
253 V AC (Partition plate PLC-ATP must be installed for voltages larger than 250 V (L1, L2, L3) between identical terminal points in adjacent modules. Potential bridging is then carried out with FBST 8-PLC... or ...FBST 500...)
Protective circuit
RCV circuit
Leakage current
< 1 mA
Max. load value
4.5 A2s
Connection method
Screw connection
Screw thread
M3
Designation
Corrosive gas test
Overvoltage category
III
ECLASS 9.0
27371603
Rated actuating current IC
1 mA
Contact material
AgSnO
Min. switching current
10 mA
Voltage drop at max. limiting continuous current
< 1 V
Assembly instructions
In rows with zero spacing
Stripping length
8 mm
Conductor cross section flexible
0.14 mm² ... 2.5 mm²
Rated surge voltage
6 kV
REACh SVHC
Lead 7439-92-1
ECLASS 10.0.1
27371603
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 11.0
27371603