1094751 Phoenix Contact Control Relays

Product Details

• Depth
  94 mm
• Voltage range with reference to US
  0.8 ... 1.2
• Nominal input voltage UN
  5 V DC
• Maximum switching voltage
  253 V AC (Partition plate PLC-ATP must be installed for voltages larger than 250 V (L1, L2, L3) between identical terminal points in adjacent modules. Potential bridging is then carried out with FBST 8-PLC... or ...FBST 500...)
• Protective circuit
  RCV circuit
• Max. load value
  4.5 A2s
• Type of note
  Notes on operation
• Ambient temperature (storage/transport)
  -40 °C ... 85 °C
• Rated actuating current IC
  1 mA
• Surge voltage protection
  > 33 V
• Min. switching current
  10 mA
• Output circuit
  2-conductor, floating
• Color
  gray
• Connection method
  Screw connection
• Designation
  Corrosive gas test
• Overvoltage category
  III
• ECLASS 11.0
  27371603
• Height
  80 mm
• Degree of protection
  IP20
• Rated control circuit supply voltage US
  24 V DC
Fitting of components
OPT-24DC/230AC/1
Maximum inrush current
30 A (10 ms)
Switching capacity min.
120 mW
Leakage current
< 1 mA
Connection name
Output side
Conductor cross section flexible
0.14 mm² ... 2.5 mm²
Rated insulation voltage
250 V AC
Standards/regulations
DIN EN 50178
Identification
ISA-S71.04. G3 Harsh Group
ECLASS 9.0
27371603
Voltage drop at max. limiting continuous current
< 1 V
Note
If the specified maximum values are exceeded, the gold plating is destroyed. The maximum values of the power contact relay are then valid. This can result in a shorter service life than with a pure power contact.
Ambient temperature (operation)
-25 °C ... 60 °C
Rated control supply current IS
≥ 8 mA (depends on type)
Input voltage range in reference to UN
0.9 ... 1.2
Contact material
AgSnO
Contact type
Single contact, 1 N/O contact
Limiting continuous current
0.75 A
Operating mode
100% operating factor
Mounting position
any
Screw thread
M3
Rated surge voltage
6 kV
REACh SVHC
Lead 7439-92-1
China RoHS
Environmentally Friendly Use Period = 50 years
Width
6.2 mm
Maximum altitude
≤ 2000 m
Status display
Yellow LED
Minimum switching voltage
24 V AC
Interrupting rating (ohmic load) max.
140 W (at 24 V DC)
Assembly instructions
In rows with zero spacing
Conductor cross section solid
0.14 mm² ... 2.5 mm²
Insulation
Safe isolation, reinforced insulation
ECLASS 10.0.1
27371603
Stripping length
8 mm
Conductor cross section AWG
26 ... 14
Pollution degree
2