1088850 Phoenix Contact AC/DC Power Supplies

Product Details

• Width
  35 mm
• Degree of protection
  IP20
• Climatic class
  3K3 (in acc. with EN 60721)
• Current consumption
  1.3 A (100 V AC)
• Type of protection
  Transient surge protection
• Recommended breaker for input protection
  6 A ... 16 A (Characteristics B, C, D, K)
• Connection in parallel
  Yes, for redundancy and increased capacity
• Protection against overvoltage at the output (OVP)
  ≤ 25 V DC
• Maximum power dissipation in no-load condition
  < 0.3 W
• MTBF (IEC 61709, SN 29500)
  > 865000 h (40 °C)
• Mounting position
  horizontal DIN rail NS 35, EN 60715
• Conductor cross section solid min.
  0.2 mm²
• Stripping length
  8 mm
• Conductor cross section AWG max.
  14
• Standard – Limitation of mains harmonic currents
  EN 61000-3-2
• CSA
  CAN/CSA-C22.2 No. 60950-1-07
• Criterion B
  Temporary impairment to operational behavior that is corrected by the device itself.
• ECLASS 11.0
  27040701
• Installation distance right/left
  0 mm / 0 mm
• Installation distance top/bottom
  30 mm / 30 mm
Max. permissible relative humidity (operation)
≤ 95 % (at 25 °C, non-condensing)
Frequency range (fN)
50 Hz ... 60 Hz 10 %
Nominal power consumption
127 VA
Inrush current
< 30 A (typical)
Power factor (cos phi)
0.49
Derating
55 °C ... 70 °C (2.5%/K)
Control deviation
< 1 % (change in load, static 10 % ... 90 %)
Residual ripple
< 30 mVPP (with nominal values)
Net weight
0.2 kg
Protection class
II (in closed control cabinet)
Connection method
Screw connection
Conductor cross section flexible max.
2.5 mm²
Standard - Safety of transformers
EN 61558-2-16
Standard – Electronic equipment for use in electrical power installations and their assembly into electrical power installations
EN 50178/VDE 0160 (PELV)
Mains variation/undervoltage
EN 61000-4-11
Criterion A
Normal operating behavior within the specified limits.
ECLASS 9.0
27040701
Depth
84 mm
Ambient temperature (operation)
-25 °C ... 70 °C (> 55 °C Derating: 2.5 %/K)
Nominal input voltage range
100 V AC ... 240 V AC
Mains buffering time
> 20 ms (120 V AC)
Protective circuit/component
Varistor
Nominal output current (IN)
4.6 A (-25 °C ... 55 °C)
Connection in series
yes
Power loss nominal load max.
< 8 W
Housing material
Polycarbonate
Assembly instructions
alignable: 0 mm horizontally, 30 mm vertically
Conductor cross section flexible min.
0.2 mm²
Conductor cross section AWG min.
24
EMC requirements for noise immunity
EN 61000-6-2
UL approvals
UL/C-UL listed UL 508
Standard - Safe isolation
DIN VDE 0100-410
REACh SVHC
Lead 7439-92-1
Degree of pollution
2
Input voltage range
85 V AC ... 264 V AC
Input fuse
2 A (slow-blow, internal)
Nominal output voltage
12 V DC ±1 %
Feedback voltage resistance
< 25 V DC
Typical response time
< 1 s
Output power
55 W
Foot latch material
POM (Polyoxymethylen)
Conductor cross section solid max.
2.5 mm²
Screw thread
M3
Standard - Electrical safety
IEC 62368-1/VDE 0805 (SELV)
Standard – Safety extra-low voltage
IEC 62368-1 (SELV) und EN 60204-1 (PELV)
ECLASS 10.0.1
27040701
Efficiency
typ. 87 % (120 V AC)
Low Voltage Directive
Conformance with Low Voltage Directive 2014/35/EC
Height
90 mm
Inflammability class in acc. with UL 94 (housing / terminal blocks)
V0
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Electromagnetic compatibility
Conformance with EMC Directive 2014/30/EU