1088128 Phoenix Contact Programmable Logic Controllers

Product Details

• Width
  14.9 mm
• Permissible humidity (operation)
  5 % ... 95 % (non-condensing)
• Air pressure (storage/transport)
  70 kPa ... 106 kPa (up to 3000 m above sea level)
• Conductor cross section flexible max.
  1.5 mm²
• Stripping length
  8 mm
• Mounting position
  See the system in which the Smart Element is used.
• Transmission speed
  See system in which you use the Smart Element.
• Transmission physics
  Copper
• Data bits
  7 or 8
• Supply voltage range
  19.2 V DC ... 30 V DC (including all tolerances, including ripple)
• Transmission type
  Transparent mode
• Height
  62.2 mm
• Degree of protection
  IP20
• Air pressure (operation)
  70 kPa ... 106 kPa (up to 3000 m above sea level)
• Conductor cross section AWG min.
  24
• Immunity to burst
  Noise immunity test in accordance with EN 61000-6-2 Fast transients (burst) EN 61000-4-4/IEC 61000-4-4 Criterion B, 2 kV
• Overvoltage category
  II (IEC 60664-1)
• Color
  traffic grey A RAL 7042
• Termination resistor
  120 Ω (active, integrated)
• Output buffer
  1 kByte
Parity
Even, odd or no parity
Mechanical tests
Vibration resistance in acc. with EN 60068-2-6/IEC 60068-2-6 5g
Interference emission
Noise emission test as per EN 61000-6-4 Class A
Number of interfaces
1
Caption
Dimensions
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Conductor cross section flexible min.
0.25 mm²
Connection method
Push-in connection
Conductor cross section, flexible, with ferrule, with plastic sleeve
0.25 mm² ... 1.5 mm²
Degree of pollution
2 (EN 60664-1)
Conductor cross section solid min.
0.25 mm²
Conductor cross section flexible, with ferrule without plastic sleeve
0.25 mm² ... 1.5 mm²
Immunity to ESD
Noise immunity test in accordance with EN 61000-6-2 Electrostatic discharge (ESD) EN 61000-4-2/IEC 61000-4-2 Criterion B, 6 kV contact discharge, 8 kV air discharge
ECLASS 9.0
27242605
China RoHS
Environmentally Friendly Use Period = 50 years
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download area
Ambient temperature (operation)
-25 °C ... 60 °C
Designation
I/O supply (UP)
Net weight
35 g
Protocols supported
Transparent
Additional text
using card edge connectors
Protective circuit
Surge protection See the system in which the Smart Element is used.
Test section
Communications supply / 24 V supply (I/O) 500 V AC 50 Hz 1 min.
Supply voltage
24 V DC (using card edge connectors)
Protection
See the system in which the Smart Element is used.
Power consumption
min. 144 mW
Protection class
III (IEC 61140, EN 61140, VDE 0140-1)
ECLASS 10.0.1
27242605
Depth
62 mm
Permissible humidity (storage/transport)
5 % ... 95 % (non-condensing)
Note on the connection method
Use shielded cables.
Conductor cross section solid max.
1.5 mm²
Conductor cross section AWG max.
16
Mounting type
Smart Element slot
Start time until ready to operate
< 500 ms (after switching on the supply voltage (object 003Dhex: WakeUpTime))
Input buffer
4 kByte
Immunity to conducted interference
Noise immunity test in accordance with EN 61000-6-2 Conducted interference EN 61000-4-6/IEC 61000-4-6 Criterion A, Test voltage 10 V
ECLASS 11.0
27242605
Stop bits
1 or 2
Current consumption
min. 6 mA (without connected peripherals)
Immunity to EF
Noise immunity test in accordance with EN 61000-6-2 Electromagnetic fields EN 61000-4-3/IEC 61000-4-3 Criterion A, Field intensity: 10 V/m
Immunity to surge
Noise immunity test in accordance with EN 61000-6-2 Transient overvoltage (surge) EN 61000-4-5/IEC 61000-4-5 Criterion B, shielded I/O cables: ±1 kV asymmetrical