1087082 Phoenix Contact Programmable Logic Controllers

Product Details

• Depth
  77.14 mm
• Connection method
  Connection for bus base module
• Conductor cross section flexible min.
  0.2 mm²
• Note on weight specifications
  with connectors and bus base module
• Supply voltage
  5 V DC (via bus base module)
• Utilization restriction
  Use in potentially explosive areas is not permitted in China.
• Permissible humidity (operation)
  5 % ... 95 % (non-condensing)
• Conductor cross section solid min.
  0.2 mm²
• Conductor cross section AWG max.
  16
• Maximum altitude
  2000 m
• Immunity to surge
  Noise immunity test in accordance with EN 61000-6-2 Transient overvoltage (surge) EN 61000-4-5/IEC 61000-4-5 Criterion A, supply lines DC: ±0.5 kV/±0.5 kV (symmetrical/asymmetrical), ±1 kV to shielded I/O cables
• ATEX
  DEMKO 20 ATEX 2370XII 3(1)G Ex ec [ia Ga] IIC T4 GcII (1)D [Ex ia Da] IIIC
• Protection class
  III (IEC 61140, EN 61140, VDE 0140-1)
• ECLASS 9.0
  27242601
• Note on dimensions
  The depth is valid when a TH 35-7,5 DIN rail is used (according to EN 60715).
• Air pressure (operation)
  70 kPa ... 106 kPa (up to 2000 m above sea level)
• Designation
  Supply of the Axioline P local bus UBus
• Conductor cross section flexible max.
  1.5 mm²
• Mounting type
  DIN rail
• Supply voltage range
  19.2 V DC ... 30 V DC (via bus base module (UL) at AXL P BK...)
Height
126.1 mm
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Air pressure (storage/transport)
70 kPa ... 106 kPa (up to 2000 m above sea level)
Conductor cross section solid max.
1.5 mm²
Color
traffic grey A RAL 7042
Degree of pollution
2
Current consumption
max. 135 mA
Interference emission
Noise emission test as per EN 61000-6-4 Class A
China RoHS
Environmentally Friendly Use Period = 25;
Width
53.6 mm
Ambient temperature (operation)
-40 °C ... 70 °C (Standard)
Permissible humidity (storage/transport)
5 % ... 95 % (non-condensing)
Degree of protection
IP20
Note on the connection method
Please observe the information provided on conductor cross sections in the “Axioline F: system and installation” user manual.
Conductor cross section AWG min.
24
Stripping length
8 mm
Net weight
0 g
Transmission speed
100 Mbps
Immunity to EF
Noise immunity test in accordance with EN 61000-6-2 Electromagnetic fields EN 61000-4-3/IEC 61000-4-3 Criterion A, Field intensity: 10 V/m
Immunity to burst
Noise immunity test in accordance with EN 61000-6-2 Fast transients (burst) EN 61000-4-4/IEC 61000-4-4 Criterion B, 2 kV
UL, USA/Canada
Ind. Cont. Eq. (E238705) also ListedInd. Cont. Eq. for haz. loc. E196811Install in: Class I, Div. 2, Groups A, B, C, D T4Intrinsically safe outputs for: Class I, Groups A, B, C, D; Class II, Groups E, F, G; Class III; [Ex ia] Haz locClass I, Zone 2, AEx e
ECLASS 11.0
27242601
Test section
5 V supply of the local bus (UBus) / functional ground 500 V AC 62 Hz 1 min.
Immunity to conducted interference
Noise immunity test in accordance with EN 61000-6-2 Conducted interference EN 61000-4-6/IEC 61000-4-6 Criterion A, Test voltage 10 V
IECEx
IECEx UL 20.0044XEx ec [ia Ga] IIC T4 Gc[Ex ia Da] IIIC
Group
A, B / IIC
Overvoltage category
II
ECLASS 10.0.1
27242601