1079389 Phoenix Contact Control Relays

Product Details

• Height
  80 mm
• Width
  14 mm
• Degree of protection
  RT III (Relay)
• Typical response time
  10 ms
• Assembly instructions
  In rows with zero spacing
• Conductor cross section flexible
  0.14 mm² ... 2.5 mm²
• REACh SVHC
  Lead 7439-92-1
• ECLASS 11.0
  27371601
• Ambient temperature (operation)
  -40 °C ... 50 °C
• Typical input current at UN
  16 mA
• Coil voltage
  60 V DC
• Operating voltage display
  Yellow LED
• Min. switching current
  10 mA (At 5 V)
• Interrupting rating (ohmic load) max.
  140 W (at 24 V DC)
• Switching capacity
  2 A (at 24 V, DC13)
• Stripping length
  8 mm
• Designation
  Corrosive gas test
• Pollution degree
  2
• China RoHS
  Environmentally Friendly Use Period = 50 years
• Utilization restriction
  EMC: class A product, see manufacturer's declaration in the download area
Maximum altitude
≤ 2000 m
Nominal input voltage UN
230 V AC
Switch-on threshold
190 V AC
Input circuit
RC element with threshold value switch
Power dissipation for nominal condition
1.04 W
Contact type
2 changeover contacts
Maximum inrush current
15 A (300 ms)
Flammability rating according to UL 94
V0 (Housing)
Connection name
Contact side
Connection method
Push-in connection
Standards/regulations
IEC 60664
ECLASS 9.0
27371601
ECLASS 10.0.1
27371601
Depth
94 mm
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Switch-off threshold
170 V AC
Typical release time
8 ms
Protective circuit
Bridge rectifier
Contact material
AgNi
Limiting continuous current
6 A
Test voltage
4 kV AC (50 Hz, 1 min., winding/contact)
Mechanical service life
3x 107 cycles
Conductor cross section AWG
26 ... 14
Rated surge voltage
4 kV
Overvoltage category
III
Type of switch contact
Single contact
Maximum switching voltage
250 V AC/DC (The separating plate PLC-ATP should be installed for voltages larger than 250 V (L1, L2, L3) between identical terminal blocks in adjacent modules. Potential bridging is then carried out with FBST 8-PLC... or ...FBST 500...)
Minimum switching voltage
5 V AC/DC (at 10 mA)
Operating mode
100% operating factor
Mounting position
any
Conductor cross section solid
0.14 mm² ... 2.5 mm²
Insulation
Basic insulation
Identification
ISA-S71.04. G3 Harsh Group
ETIM 6.0
EC001437
ETIM 7.0
EC001437