1078800 Phoenix Contact Control Relays

Product Details

• Type of note
  Notes on operation
• Width
  14 mm
• Height
  80 mm
• Ambient temperature (storage/transport)
  -40 °C ... 85 °C
• Degree of protection
  RT II (Relay)
• Typical input current at UN
  33 mA
• Typical release time
  10 ms
• Operating voltage display
  Yellow LED
• Type of switch contact
  Single contact
• Maximum switching voltage
  250 V AC/DC (The separating plate PLC-ATP should be installed for voltages larger than 250 V (L1, L2, L3) between identical terminal blocks in adjacent modules. Potential bridging is then carried out with FBST 8-PLC... or ...FBST 500...)
• Min. switching current
  100 mA (at 12 V DC)
• Switching capacity min.
  1200 mW
• Operating mode
  100% operating factor
• Connection method
  Screw connection
• Conductor cross section solid
  0.14 mm² ... 2.5 mm²
• Insulation
  Safe isolation, reinforced insulation
• Overvoltage category
  III
• Maximum inrush current
  80 A (for 20 ms)
• Interrupting rating (ohmic load) max. bridged
  240 W (for 24 V DC. The value is permissible if both connections 13, both connections 14 and both connections BB are bridged.)
• Flammability rating according to UL 94
  V0 (Housing)
Connection name
Contact side
Conductor cross section AWG
26 ... 14
Rated surge voltage
6 kV
Identification
ISA-S71.04. G3 Harsh Group
ECLASS 11.0
27371601
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download area
Note
The system installer must ensure the touch protection of the product (at voltages > 25 V AC/60 V DC). The product is a built-in device without protection against direct contact.
Depth
94 mm
Ambient temperature (operation)
-40 °C ... 60 °C
Maximum altitude
≤ 2000 m
Nominal input voltage UN
12 V DC
Typical response time
8 ms
Coil voltage
12 V DC
Power dissipation for nominal condition
0.4 W
Minimum switching voltage
12 V (at 100 mA)
Interrupting rating (ohmic load) max.
144 W (at 24 V DC)
Test voltage
4 kV AC (50 Hz, 1 min., winding/contact)
Mechanical service life
3x 107 cycles
Assembly instructions
In rows with zero spacing
Screw thread
M3
Conductor cross section flexible
0.14 mm² ... 2.5 mm²
Standards/regulations
EN 50178
REACh SVHC
Lead 7439-92-1
ECLASS 10.0.1
27371601
ETIM 7.0
EC001437
Protective circuit
Reverse polarity protection Polarity protection diode
Contact type
1 N/O contact
Contact material
AgSnO2
Limiting continuous current
6 A
Switching capacity
2 A (at 24 V, DC13)
Mounting position
any
Stripping length
8 mm
Designation
Corrosive gas test
Rated insulation voltage
250 V AC
Pollution degree
2
ECLASS 9.0
27371601
China RoHS
Environmentally Friendly Use Period = 50 years
ETIM 6.0
EC001437