1075388 Phoenix Contact Terminal Blocks

Product Details

• ECLASS 10.0.1
  27141126
• Result of surge voltage test
  Test passed
• Result of flexion and pull-out test
  Test passed
• Bending test turns
  135
• Number of levels
  1
• Flammability rating according to UL 94
  V0
• Insulating material group
  I
• Maximum load current
  57 A (with 10 mm² conductor cross section)
• Shock protection test specification
  DIN EN 50274 (VDE 0660-514):2002-11
• ECLASS 4.1
  27141126
• Number of connections
  2
• Rated surge voltage
  8 kV
• Static insulating material application in cold
  -60 °C
• Width
  8.2 mm
• Height NS 32
  58 mm
• Tightening torque max
  1.8 Nm
• Conductor cross section AWG min.
  24
• Conductor cross section flexible, with ferrule with plastic sleeve min.
  0.25 mm²
• Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
  0.5 mm²
• Operating temperature
  -60 °C ... 105 °C (max. short-term operating temperature 130°C)
Connection in acc. with standard
IEC 60947-7-1
Conductor cross section AWG max.
8
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.25 mm²
2 conductors with same cross section, stranded min.
0.2 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
4 mm²
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 11.0
27141126
ECLASS 9.0
27141126
UNSPSC 11
39121410
UNSPSC 21.0
39121410
Insulating material
PA
Degree of pollution
3
Maximum power dissipation for nominal condition
1.31 W
Open side panel
Yes
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Power frequency withstand voltage setpoint
2.2 kV
ASD level
1.2 g2/Hz
Tightening torque, min
1.5 Nm
Conductor cross section flexible max.
6 mm²
Min. AWG conductor cross section, flexible
24
2 conductors with same cross section, solid min.
0.2 mm²
2 conductors with same cross section, solid max.
2.5 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
1.5 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 5.1
27141100
ETIM 3.0
EC000902
UNSPSC 13.2
39121410
Potentials
1
Overvoltage category
III
Nominal current IN
41 A
Finger protection
guaranteed
Surge voltage test setpoint
9.8 kV
Bending test conductor cross section/weight
0.2 mm² / 0.2 kg
Conductor cross section tensile test
1.5 mm²
Tight fit on carrier
NS 32/NS 35
Conductor cross section short circuit testing
6 mm²
Proof of thermal characteristics (needle flame) effective duration
30 s
Stripping length
12 mm
Conductor cross section solid max.
10 mm²
Conductor cross section flexible min.
0.2 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
0.25 mm²
Internal cylindrical gage
A5
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 5.0
27141126
ETIM 2.0
EC000902
UNSPSC 6.01
30211811
UNSPSC 19.0
39121410
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Length
88.5 mm
Connection method
Screw connection with spring support
Conductor cross section solid min.
0.2 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
6 mm²
2 conductors with same cross section, stranded max.
2.5 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
REACh SVHC
Lead 7439-92-1
ECLASS 4.0
27141126
ECLASS 7.0
27141126
ETIM 4.0
EC000902
ETIM 6.0
EC000902
UNSPSC 12.01
39121410
ETIM 7.0
EC000902
UNSPSC 18.0
39121410
Max. AWG conductor cross section, flexible
10
ECLASS 6.0
27141100
UNSPSC 7.0901
39121410
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Conductor cross section flexible, with ferrule with plastic sleeve max.
6 mm²
UNSPSC 20.0
39121410
Nominal voltage UN
1000 V
Result of power-frequency withstand voltage test
Test passed
Result of tight fit on support
Test passed
Back of the hand protection
guaranteed
Bending test rotation speed
10 rpm
Oscillation, broadband noise test result
Test passed
Color
gray
Requirements, voltage drop
U1 ≤ 6,4 mV (1,6 mV x number of conductorclamping units or disconnect unit contactpoints)U2 ≤ 1,5 x U1
Short-time current
0.72 kA
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2018-05
Test duration per axis
5 h
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Screw thread
M4
Nominal cross section
6 mm²
Tensile test result
Test passed
Tractive force setpoint
40 N
Short circuit stability result
Test passed
Test spectrum
Service life test category 2, bogie-mounted
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Height NS 35/7,5
53 mm
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Test directions
X-, Y- and Z-axis (pos. and neg.)
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Height NS 35/15
60.5 mm
Result of thermal test
Test passed
Acceleration
30g
Shock duration
18 ms
Number of shocks per direction
3
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Shock form
Semi-sinusoidal
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Shock test result
Test passed
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Connection
1 level