1066718 Phoenix Contact DC/DC Converters

Product Details

• Weight
  0.246 kg
• Height
  99 mm
• Power dissipation SLEEP MODE
  < 1 W
• Power loss nominal load max.
  < 8 W
• Degree of pollution
  2
• EMC requirements for noise emission
  EN 61000-6-3
• Identification
  DNV GL
• Electromagnetic HF field
  EN 61000-4-3
• Comments
  Criterion A
• Input voltage range
  9 V DC ... 24 V DC -25 % (SELV)
• Switch-on time
  < 1 s
• Inrush current integral (I2t)
  typ. 0.1 A2s
• Type test (IEC/EN 60950-1) B
  4 kV DC
• Type test (IEC/EN 60950-1) D
  0.5 kV DC
• Stripping length
  8 mm
• Conductor cross section AWG
  26 ... 14
• Nominal output current (IN)
  2.5 A
• System deviation, static
  < 1 % (change in load, static 10 % ... 90 %)
• Residual ripple
  < 20 mVPP
• Feedback voltage resistance
  ≤ 35 V DC
UOut
> 0.9 x USet (LED lights up green)
Time
320000 h
Inflammability class in acc. with UL 94 (housing / terminal blocks)
V0
Width
32 mm
Efficiency
typ. 92.1 % (24 V DC)
Ambient temperature (start-up type tested)
-40 °C
Overvoltage category EN 61010-1
II (≤ 5000 m)
Standards/regulations
EN 61000-4-29
Electromagnetic compatibility
Conformance with EMC Directive 2014/30/EU
Noise emission
EN 55016
Contact discharge
8 kV (Test Level 4)
Electric strength, max.
35 V DC (60 s)
Type test (IEC/EN 60950-1) A
2.6 kV DC
Input fuse
15 A (fast blow, internal)
Production test B
2 kV DC
Conductor cross section solid
0.14 mm² ... 2.5 mm²
Flexible conductor cross section flexible (ferrule, w/o plastic sleeve)
0.2 mm² ... 2.5 mm²
Nominal output voltage (UN)
24 V DC
System deviation, dynamic
< 2 % (Dynamic load change 10 % ... 90 %, 10 Hz)
Short-circuit-proof
yes
Protection against overvoltage at the output (OVP)
≤ 32 V DC
MTBF (IEC 61709, SN 29500)
> 1347000 h (25 °C)
Output current
5 A
Protection class
II
Width with alternative assembly
90 mm
Mains buffering
typ. 16 ms (24 V DC)
Typical current consumption
typ. 7.2 A (12 V DC)
Type test (IEC/EN 60950-1) C
0.5 kV DC
Connection method
Screw connection
Production test D
0.5 kV DC
Setting range of the output voltage (USet)
24 V DC ... 28 V DC (> 24 V DC, constant capacity)
Static Boost (IStat.Boost)
3.125 A (≤ 40 °C)
Dynamic Boost (IDyn.Boost)
5 A (≤ 60 °C (4,9 s))
Connection in parallel
Yes, for redundancy and increased capacity
Rise time
< 1 s (UOUT (10 % ... 90 %))
Temperature
30 °C
Main converter stage
70 kHz ... 150 kHz (Main converter stage)
Degree of protection
IP20
Depth with alternative assembly
32 mm
Maximum power dissipation in no-load condition
< 1.3 W
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Max. permissible relative humidity (operation)
≤ 95 % (at 25 °C, non-condensing)
Climatic class
3K3 (in acc. with EN 60721)
Designation
Shipbuilding
DNV GL conducted interference
Class B
Electrostatic discharge
EN 61000-4-2
Input
2 kV (symmetrical)
Output
1 kV (Test Level 3 - symmetrical)
I/O/S
asymmetrical
Test level 1
15 Hz 150 Hz (Test Level 3)
Input, output (test level 2)
1 kHz (Test Level 2 - asymmetrical)
Criterion A
Normal operating behavior within the specified limits.
Inrush current limitation typical
8.6 A
Insulation voltage input/output
2.6 kV DC (type test)
Production test A
1.2 kV DC
Production test C
0.5 kV DC
Flexible conductor cross section (ferrule with plastic sleeve)
0.25 mm² ... 2.5 mm²
Conductor cross section flexible
0.14 mm² ... 2.5 mm²
Magnetic circuit breaker tripping
A1 ... A4 / B2 / C1 ... C2 / Z1 ... Z4
System deviation, input voltage change
< 0.1 % (change in input voltage ±10 %)
No-load proof
yes
Connection in series
yes
POut
> PThr (LED lights up yellow, output power > PThr, depending on the rotary selector switch setting)
Voltage
1 kV
Auxiliary converter stage
4 kHz ... 70 kHz (Auxiliary converter stage)
Depth
90 mm
Height with alternative assembly
99 mm
Maximum altitude
≤ 5000 m (> 2000 m, observe derating)
Shock
18 ms, 30g, in each space direction (according to IEC 60068-2-27)
EMC requirements for noise immunity
EN 61000-6-1
EMC requirements, power plant
IEC 61850-3
DNV GL noise radiation
Class B
Frequency range
50 Hz ... 60 Hz
Test field strength
1000 A/m
Signal
2 kV (Test Level 4 - symmetrical)
Voltage dip
0 %
Attenuated sinusoidal oscillations (ring wave)
EN 61000-4-12
Test level 6
0 Hz 16.7 Hz 50 Hz 60 Hz (Test Level 3)
Signals (test level 1)
1 kHz (Test Level 2 - symmetrical)
Ambient temperature (operation)
-25 °C ... 70 °C (> 60 °C Derating: 2.5 %/K)
Vibration (operation)
< 15 Hz, ±2.5 mm amplitude; 15 Hz ... 100 Hz: 2.3 g 90 Min. (in accordance with IEC 60068-2-6)
Standard designation
Mains variation/undervoltage
Conducted noise emission
EN 55016
Additional text
Test Level 2
Fast transients (burst)
EN 61000-4-4
Conducted interference
EN 61000-4-6
Voltage dips
EN 61000-4-11
Pulse-shape magnetic field
EN 61000-4-9
Test level 5
16.7 Hz 50 Hz 60 Hz 150 Hz 180 Hz (Test Level 3)
Attenuated oscillating wave
EN 61000-4-18
Signals (test level 2)
1 kHz (Test Level 2 - asymmetrical)
Discharge in air
8 kV (Test Level 3)
Surge voltage load (surge)
EN 61000-4-5
Frequency
60 Hz
Asymmetrical conducted disturbance variables
EN 61000-4-16
Test level 4
15 kHz 150 kHz (Test Level 3)
Criterion B
Temporary impairment to operational behavior that is corrected by the device itself.
Criterion C
Temporary adverse effects on the operating behavior, which the device corrects automatically or which can be restored by actuating the operating elements.
Power frequency magnetic field
EN 61000-4-8
Number of periods
0.5 / 1 / 5 / 50 periods
Test level 2
150 Hz 1.5 kHz (Test Level 3)
Test level 3
1.5 kHz 15 kHz (Test Level 3)
Input, output (test level 1)
1 kHz (Test Level 2 - symmetrical)
ECLASS 9.0
27210901