1066704 Phoenix Contact DC/DC Converters

Product Details

• Weight
  0.173 kg
• Connection method
  Push-in connection
• Conductor cross section AWG
  24 ... 14
• Setting range of the output voltage (USet)
  5 V DC ... 15 V DC (> 12 V DC, constant capacity)
• Output current
  2.5 A
• Inflammability class in acc. with UL 94 (housing / terminal blocks)
  V0
• Depth
  90 mm
• Ambient temperature (storage/transport)
  -40 °C ... 85 °C
• Degree of pollution
  2
• Standard - Safe isolation
  IEC 61558-2-16
• Input voltage range
  12 V DC ... 24 V DC -25 % ... +33 % (SELV)
• Inrush current limitation typical
  1.5 A (after 1 ms)
• Production test A
  3 kV AC
• Static Boost (IStat.Boost)
  3.125 A (≤ 40 °C)
• MTBF (IEC 61709, SN 29500)
  > 1347000 h (25 °C)
• Voltage
  300 V (1 s)
• Main converter stage
  70 kHz ... 150 kHz (Main converter stage)
• Height
  106 mm
• Ambient temperature (operation)
  -25 °C ... 70 °C (> 60 °C Derating: 2.5 %/K)
• Maximum altitude
  ≤ 5000 m (> 2000 m, observe derating)
Shock
18 ms, 30g, in each space direction (according to IEC 60068-2-27)
Overvoltage category EN 61010-1
II (≤ 5000 m)
Standard – Safety extra-low voltage
IEC 61010-1 (SELV)
Electrostatic discharge
EN 61000-4-2
Test field strength
1000 A/m
Fast transients (burst)
EN 61000-4-4
I/O/S
asymmetrical
Additional text
Test Level 2
Asymmetrical conducted disturbance variables
EN 61000-4-16
Attenuated oscillating wave
EN 61000-4-18
ECLASS 9.0
27210901
Mains buffering
typ. 3 ms (12 V DC)
Insulation voltage input/output
2.6 kV DC (type test)
Stripping length
10 mm
Nominal output voltage (UN)
12 V DC
Feedback voltage resistance
≤ 25 V DC
Auxiliary converter stage
4 kHz ... 70 kHz (Auxiliary converter stage)
Width
22.5 mm
Climatic class
3K3 (in acc. with EN 60721)
Typical current consumption
typ. 3.55 A (12 V DC)
Input fuse
15 A (fast blow, internal)
Conductor cross section solid
0.2 mm² ... 2.5 mm²
Dynamic Boost (IDyn.Boost)
5 A (≤ 60 °C (4,9 s))
Temperature
25 °C
Degree of protection
IP20
Hood version
Polycarbonate
Max. permissible relative humidity (operation)
≤ 95 % (at 25 °C, non-condensing)
EMC requirements for noise immunity
EN 61000-6-1
Standard - Electrical safety
IEC 61010-2-201 (SELV)
Standard - safety for equipment for measurement, control, and laboratory use
IEC 61010-1
Electromagnetic compatibility
Conformance with EMC Directive 2014/30/EU
Noise emission
EN 55016
Discharge in air
8 kV (Test Level 3)
Frequency range
50 Hz ... 60 Hz
Surge voltage load (surge)
EN 61000-4-5
Frequency
60 Hz
Voltage dip
0 %
Pulse-shape magnetic field
EN 61000-4-9
Criterion A
Normal operating behavior within the specified limits.
Criterion C
Temporary adverse effects on the operating behavior, which the device corrects automatically or which can be restored by actuating the operating elements.
Inrush current integral (I2t)
typ. 0.05 A2s
Type test (IEC/EN 60950-1) A
4 kV AC
Conductor cross section flexible
0.2 mm² ... 2.5 mm²
Nominal output current (IN)
2.5 A
Protection against overvoltage at the output (OVP)
≤ 18 V DC
Time
432000 h
Protection class
II
Efficiency
typ. 91.1 % (12 V DC)
Ambient temperature (start-up type tested)
-40 °C
Vibration (operation)
< 15 Hz, ±2.5 mm amplitude; 15 Hz ... 100 Hz: 2.3 g 90 Min. (in accordance with IEC 60068-2-6)
Standard - Safety of transformers
EN 61558-2-16
Standard – Limitation of mains harmonic currents
EN 61000-3-2
Contact discharge
8 kV (Test Level 4)
Comments
Criterion B
Output
1 kV (Test Level 3 - symmetrical)
Signal
2 kV (Test Level 4 - symmetrical)
Voltage dips
EN 61000-4-11
Test level 1
16.67 Hz 50 Hz 60 Hz (Test Level 3)
Test level 2
16.67 Hz 50 Hz 60 Hz (Test Level 4)
Conducted noise emission
EN 55016
Electromagnetic HF field
EN 61000-4-3
Input
2 kV (symmetrical)
Conducted interference
EN 61000-4-6
Power frequency magnetic field
EN 61000-4-8
Number of periods
0.5 / 1 / 5 / 50 periods
Attenuated sinusoidal oscillations (ring wave)
EN 61000-4-12
Criterion B
Temporary impairment to operational behavior that is corrected by the device itself.