1066703 Phoenix Contact AC/DC Power Supplies

Product Details

• Weight
  0.171 kg
• Mains buffering
  typ. 2 ms (12 V DC)
• Inrush current limitation typical
  typ. 1.6 A
• Production test A
  3 kV AC
• Nominal output current (IN)
  1.3 A
• Protection against overvoltage at the output (OVP)
  < 32 V DC
• Temperature
  25 °C
• Height
  99 mm
• Ambient temperature (operation)
  -25 °C ... 70 °C (> 60 °C Derating: 2.5 %/K)
• Maximum altitude
  ≤ 5000 m (> 2000 m, observe derating)
• Conducted noise emission
  EN 55016
• Electromagnetic HF field
  EN 61000-4-3
• Signal
  2 kV (Test Level 4 - symmetrical)
• Number of periods
  0.5 / 1 / 5 / 50 periods
• Test level 2
  16.67 Hz 50 Hz 60 Hz (Test Level 4)
• Noise emission
  EN 55016
• Input voltage range
  12 V DC ... 24 V DC -25 % ... +33 % (SELV)
• Switch-on time
  < 1 s
• Insulation voltage input/output
  2.6 kV DC (type test)
• Stripping length
  10 mm
Setting range of the output voltage (USet)
24 V DC ... 28 V DC (> 24 V DC, constant capacity)
Dynamic Boost (IDyn.Boost)
2.6 A (≤ 60 °C (4,9 s))
Feedback voltage resistance
≤ 35 V DC
Output current
2.5 A
Protection class
II
Efficiency
typ. 90.4 % (12 V DC)
Max. permissible relative humidity (operation)
≤ 95 % (at 25 °C, non-condensing)
Climatic class
3K3 (in acc. with EN 60721)
Electromagnetic compatibility
Conformance with EMC Directive 2014/30/EU
Electric strength, max.
35 V DC (60 s)
Inrush current integral (I2t)
typ. 0.1 A2s
Conductor cross section flexible
0.2 mm² ... 2.5 mm²
Static Boost (IStat.Boost)
1.625 A (≤ 40 °C)
Voltage
300 V (1 s)
Main converter stage
70 kHz ... 150 kHz (Main converter stage)
Depth
90 mm
Ambient temperature (start-up type tested)
-40 °C
Degree of pollution
2
Standard designation
Limitation of harmonic line currents
Electrostatic discharge
EN 61000-4-2
Comments
Criterion B
Frequency
60 Hz
Attenuated sinusoidal oscillations (ring wave)
EN 61000-4-12
Criterion C
Temporary adverse effects on the operating behavior, which the device corrects automatically or which can be restored by actuating the operating elements.
Type test (IEC/EN 60950-1) A
4 kV AC
Connection method
Push-in connection
Nominal output voltage (UN)
24 V DC
Time
432000 h
Degree of protection
IP20
Width
22.5 mm
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Shock
18 ms, 30g, in each space direction (according to IEC 60068-2-27)
Overvoltage category EN 61010-1
II (≤ 5000 m)
Identification
CB scheme (IEC 61010-1, IEC 61010-2-201)
Standards/regulations
EN 61000-3-2
Contact discharge
8 kV (Test Level 4)
Frequency range
50 Hz ... 60 Hz
Input
2 kV (symmetrical)
Voltage dip
0 %
Voltage dips
EN 61000-4-11
Test level 1
16.67 Hz 50 Hz 60 Hz (Test Level 3)
ECLASS 9.0
27210901
Typical current consumption
typ. 3.75 A (12 V DC)
Typical response time
700 ms (from SLEEP MODE)
Input fuse
15 A (fast blow, internal)
Conductor cross section AWG
24 ... 14
Conductor cross section solid
0.2 mm² ... 2.5 mm²
MTBF (IEC 61709, SN 29500)
> 1347000 h (25 °C)
Auxiliary converter stage
4 kHz ... 70 kHz (Auxiliary converter stage)
Inflammability class in acc. with UL 94 (housing / terminal blocks)
V0
Vibration (operation)
< 15 Hz, ±2.5 mm amplitude; 15 Hz ... 100 Hz: 2.3 g 90 Min. (in accordance with IEC 60068-2-6)
EMC requirements for noise immunity
EN 61000-6-1
Designation
SIQ
Discharge in air
8 kV (Test Level 3)
Test field strength
1000 A/m
Surge voltage load (surge)
EN 61000-4-5
Power frequency magnetic field
EN 61000-4-8
Additional text
Test Level 2
Criterion A
Normal operating behavior within the specified limits.
Attenuated oscillating wave
EN 61000-4-18
Fast transients (burst)
EN 61000-4-4
Output
1 kV (Test Level 3 - symmetrical)
Conducted interference
EN 61000-4-6
I/O/S
asymmetrical
Pulse-shape magnetic field
EN 61000-4-9
Asymmetrical conducted disturbance variables
EN 61000-4-16
Criterion B
Temporary impairment to operational behavior that is corrected by the device itself.