1047499 Phoenix Contact Terminal Blocks

Product Details

• Number of connections
  7
• Nominal cross section
  1.5 mm²
• Flammability rating according to UL 94
  V0
• Maximum load current
  41 A (with 6 mm² conductor cross section)
• Finger protection
  guaranteed
• Result of flexion and pull-out test
  Test passed
• Result of voltage-drop test
  Test passed
• Result of thermal test
  Test passed
• Test specification, oscillation, broadband noise
  DIN EN 50155 (VDE 0115-200):2018-05
• Acceleration
  30g
• Test duration per axis
  5 h
• Relative insulation material temperature index (Elec., UL 746 B)
  130 °C
• Specific optical density of smoke NFPA 130 (ASTM E 662)
  passed
• Fire protection for rail vehicles (DIN EN 45545-2) R26
  HL 1 - HL 3
• Connection method
  Push-in connection
• Color
  orange
• Insulating material
  PA
• Maximum total current
  41 A
• Shock protection test specification
  DIN EN 50274 (VDE 0660-514):2002-11
• Result of surge voltage test
  Test passed
Tight fit on carrier
NS 35/NS 15
Result of temperature-rise test
Test passed
Test spectrum
Service life test category 2, bogie-mounted
Test directions
X-, Y- and Z-axis (pos. and neg.)
Shock duration
18 ms
Nominal cross section feed-in
4 mm²
Rated surge voltage
6 kV
Overvoltage category
III
Nominal current IN
41 A
Open side panel
No
Power frequency withstand voltage setpoint
1.89 kV
Tensile test result
Test passed
Bending test turns
135
Requirement temperature-rise test
Increase in temperature ≤ 45 K
ASD level
6.12 (m/s2)2/Hz
Number of levels
1
Insulating material group
I
Back of the hand protection
guaranteed
Result of power-frequency withstand voltage test
Test passed
Degree of pollution
3
Bending test rotation speed
10 rpm
Oscillation, broadband noise test result
Test passed
Static insulating material application in cold
-60 °C
Nominal voltage UN
500 V
Result of tight fit on support
Test passed
Short-time current
0.3 kA
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Shock form
Half-sine
Number of shocks per direction
3
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Height NS 15
27.4 mm
Conductor cross section solid min.
0.34 mm²
Conductor cross section flexible min.
0.2 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
4 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
4 mm²
Connection
Feed-in stage
Permissible humidity (storage/transport)
30 % ... 70 %
ETIM 7.0
EC000897
Setpoint
5 N
Short circuit stability result
Test passed
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Bending test conductor cross section/weight
0.2 mm² / 0.2 kg
Conductor cross section short circuit testing
2.5 mm²
Ageing test for screwless modular terminal block temperature cycles
192
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2018-05
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Conductor cross section solid max.
6 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.2 mm²
Internal cylindrical gage
A3
Value
0.2 mm²
ECLASS 10.0.1
27141120
ECLASS 9.0
27141120
Result of aging test
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Length
21.6 mm
Connection in acc. with standard
IEC 60947-7-1
Conductor cross section AWG min.
24
Min. AWG conductor cross section, flexible
24
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Ambient temperature (actuation)
-5 °C ... 70 °C
Shock test result
Test passed
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Stripping length
10 mm ... 12 mm
Conductor cross section AWG max.
10
Max. AWG conductor cross section, flexible
10
Connection cross sections directly pluggable
0.34 mm² 6 mm² 24 12 0.34 mm² 4 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Ambient temperature (assembly)
-5 °C ... 70 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Width
19 mm
Conductor cross section flexible max.
4 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.2 mm²
ECLASS 11.0
27141120
ETIM 6.0
EC000897