1047451 Phoenix Contact Terminal Blocks

Product Details

• Conductor cross section flexible, with ferrule with plastic sleeve min.
  0.2 mm²
• Value
  0.2 mm²
• ECLASS 9.0
  27141120
• Max. AWG conductor cross section, flexible
  10
• Conductor cross section flexible, with ferrule with plastic sleeve max.
  4 mm²
• Permissible humidity (storage/transport)
  30 % ... 70 %
• Ambient temperature (actuation)
  -5 °C ... 70 °C
• ETIM 6.0
  EC000897
• Number of levels
  1
• Color
  orange
• Degree of pollution
  3
• Overvoltage category
  III
• Maximum total current
  41 A
• Nominal voltage UN
  500 V
• Finger protection
  guaranteed
• Power frequency withstand voltage setpoint
  1.89 kV
• Result of flexion and pull-out test
  Test passed
• Result of tight fit on support
  Test passed
• Result of voltage-drop test
  Test passed
• Result of temperature-rise test
  Test passed
Result of thermal test
Test passed
Ageing test for screwless modular terminal block temperature cycles
192
Test spectrum
Service life test category 2, bogie-mounted
Acceleration
30g
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Height NS 15
27.4 mm
Stripping length
10 mm ... 12 mm
Conductor cross section solid min.
0.34 mm²
Conductor cross section flexible max.
4 mm²
Nominal cross section
1.5 mm²
Flammability rating according to UL 94
V0
Insulating material group
I
Maximum load current
41 A (with 6 mm² conductor cross section)
Open side panel
No
Back of the hand protection
guaranteed
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Bending test rotation speed
10 rpm
Bending test conductor cross section/weight
0.2 mm² / 0.2 kg
Setpoint
5 N
Short circuit stability result
Test passed
Short-time current
0.3 kA
Proof of thermal characteristics (needle flame) effective duration
30 s
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2018-05
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Shock form
Half-sine
Connection method
Push-in connection
Length
21.6 mm
Conductor cross section AWG min.
24
Conductor cross section flexible min.
0.2 mm²
Min. AWG conductor cross section, flexible
24
ECLASS 11.0
27141120
Conductor cross section short circuit testing
2.5 mm²
Result of aging test
Test passed
Oscillation, broadband noise test result
Test passed
ASD level
6.12 (m/s2)2/Hz
Test duration per axis
5 h
Shock duration
18 ms
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Width
43.9 mm
Connection in acc. with standard
IEC 60947-7-1
Conductor cross section solid max.
6 mm²
Conductor cross section AWG max.
10
Connection
Feed-in stage
Nominal cross section feed-in
4 mm²
Result of power-frequency withstand voltage test
Test passed
Tight fit on carrier
NS 35/NS 15
Surface flammability NFPA 130 (ASTM E 162)
passed
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.2 mm²
Connection cross sections directly pluggable
0.34 mm² 6 mm² 24 12 0.34 mm² 4 mm²
Insulating material
PA
Shock test result
Test passed
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Test directions
X-, Y- and Z-axis (pos. and neg.)
Rated surge voltage
6 kV
Tensile test result
Test passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
ETIM 7.0
EC000897
Nominal current IN
41 A
Result of surge voltage test
Test passed
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
ECLASS 10.0.1
27141120
Number of connections
19
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Bending test turns
135
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2018-05
Number of shocks per direction
3
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Conductor cross section flexible, with ferrule without plastic sleeve max.
4 mm²
Internal cylindrical gage
A3
Ambient temperature (assembly)
-5 °C ... 70 °C