1046963 Phoenix Contact Terminal Blocks

Product Details

• Number of levels
  1
• Nominal cross section feed-in
  4 mm²
• Insulating material
  PA
• Degree of pollution
  3
• Result of thermal test
  Test passed
• Proof of thermal characteristics (needle flame) effective duration
  30 s
• Test spectrum
  Service life test category 2, bogie-mounted
• Shock test result
  Test passed
• Nominal cross section
  1.5 mm²
• Flammability rating according to UL 94
  V0
• Maximum load current
  22 A (with a 2.5 mm² conductor cross section)
• Open side panel
  No
• Test specification, oscillation, broadband noise
  DIN EN 50155 (VDE 0115-200):2018-05
• Test frequency
  f1 = 5 Hz to f2 = 250 Hz
• Test duration per axis
  5 h
• Shock form
  Half-sine
• Surface flammability NFPA 130 (ASTM E 162)
  passed
• Smoke gas toxicity NFPA 130 (SMP 800C)
  passed
• Fire protection for rail vehicles (DIN EN 45545-2) R26
  HL 1 - HL 3
• Length
  21.6 mm
Conductor cross section AWG min.
26
Conductor cross section AWG max.
14
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.14 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
1.5 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
ECLASS 10.0.1
27141120
ETIM 6.0
EC000897
Number of connections
13
Color
red
Insulating material group
I
Nominal current IN
17.5 A
Nominal voltage UN
450 V
Acceleration
30g
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2018-05
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Number of shocks per direction
3
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Height
17.7 mm
Connection
Pick-off level
Conductor cross section solid min.
0.34 mm²
Max. AWG conductor cross section, flexible
14
Value
0.34 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.14 mm²
ETIM 7.0
EC000897
Overvoltage category
III
Rated surge voltage
6 kV
Maximum total current
32 A
Oscillation, broadband noise test result
Test passed
Test directions
X-, Y- and Z-axis (pos. and neg.)
ASD level
6.12 (m/s2)2/Hz
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Connection method
Push-in connection
Conductor cross section solid max.
2.5 mm²
Static insulating material application in cold
-60 °C
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Width
31.4 mm
Stripping length
8 mm ... 10 mm
Connection in acc. with standard
IEC 60998-2-2
Conductor cross section flexible min.
0.14 mm²
Min. AWG conductor cross section, flexible
26
Connection cross sections directly pluggable
0.34 mm² 2.5 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 11.0
27141120
Conductor cross section flexible max.
1.5 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
1.5 mm²
Internal cylindrical gage
A3
Shock duration
18 ms
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 9.0
27141120
Ambient temperature (actuation)
-5 °C ... 70 °C
Ambient temperature (assembly)
-5 °C ... 70 °C