1033202 Phoenix Contact Electrical Measuring & Monitoring Instruments

Product Details

• Ambient temperature (operation)
  -40 °C ... 70 °C
• Voltage input signal
  9.6 V DC ... 30 V DC
• Output current
  ≤ 30 mA
• Supply voltage range
  9.6 V DC ... 30 V DC (The DIN rail bus connector (ME 6,2 TBUS-2 1,5/5-ST-3,81 GN, Order No. 2869728) can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715))
• Stripping length
  10 mm
• Torque
  0.5 Nm ... 0.6 Nm
• Degree of pollution
  2
• Noise emission
  EN 61000-6-4
• Fire protection for rail vehicles (DIN EN 45545-2) R24
  HL 1 - HL 2
• DNV GL-Humidity
  B
• Depth
  119.2 mm
• Permissible humidity (operation)
  5 % ... 95 % (non-condensing)
• Short-circuit current
  > 35 mA
• Typical current consumption
  < 38.2 mA (24 V)
• Conductor cross section AWG
  24 ... 12 (flexible)
• Maximum temperature coefficient
  < 0.01 %/K
• Mounting position
  any
• Assembly instructions
  The T connector can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715.
• Standards/regulations
  GB 3836.1
• REACh SVHC
  Lead 7439-92-1
ECLASS 7.0
27049002
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download area
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Degree of protection
IP20 (not assessed by UL)
Power consumption
< 900 mW (9.6 V DC)
Height
109.81 mm
Transmitter supply voltage
15 V DC
Output voltage with wire break
15 V DC
Connection method
Screw connection
Conductor cross section flexible
0.14 mm² ... 2.5 mm²
Electrical isolation
Reinforced insulation in accordance with IEC 61010-1
Rated insulation voltage
300 V (effective)
Designation
GB Standard
DNV GL-EMC
A
ECLASS 10.0.1
27040701
ECLASS 9.0
27040701
Width
6.2 mm
Maximum altitude
≤ 2000 m
Max. output voltage
15 V DC
Ripple
< 20 mVPP (at 600 Ω)
Screw thread
M3
Maximum transmission error
≤ 0.1 % (of final value)
Electromagnetic compatibility
Conformance with EMC directive
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 2
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 2
DNV GL-Vibration
A
China RoHS
Environmentally Friendly Use Period = 50 years
Overvoltage category
II
ETIM 6.0
EC002540
Noise immunity
EN 61000-6-2 When being exposed to interference, there may be minimal deviations.
Housing material
PBT
DNV GL-Temperature
B
Conductor cross section solid
0.2 mm² ... 1.5 mm² (with ferrule)
Test voltage, input/output/supply
3 kV (50 Hz, 1 min.)
Color
gray
DNV GL-Enclosure
Required protection according to the Rules shall be provided upon installation on board
ECLASS 11.0
27040701
ECLASS 6.0
27049000
ETIM 7.0
EC002540