1033201 Phoenix Contact Electrical Measuring & Monitoring Instruments

Product Details

• DNV GL-Vibration
  A
• ECLASS 11.0
  27040701
• ETIM 7.0
  EC002540
• DNV GL-Enclosure
  Required protection according to the Rules shall be provided upon installation on board
• ECLASS 6.0
  27049000
• ECLASS 9.0
  27040701
• China RoHS
  Environmentally Friendly Use Period = 50 years
• ECLASS 7.0
  27049002
• ECLASS 10.0.1
  27040701
• ETIM 6.0
  EC002540
• Ambient temperature (storage/transport)
  -40 °C ... 85 °C
• Output voltage with wire break
  15 V
• Supply voltage range
  9.6 V DC ... 30 V DC (The DIN rail bus connector (ME 6,2 TBUS-2 1,5/5-ST-3,81 GN, Order No. 2869728) can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715))
• Conductor cross section solid
  0.2 mm² ... 2.5 mm² (with ferrule)
• Maximum transmission error
  ≤ 0.4 % (of final value)
• Rated insulation voltage
  300 V (effective)
• Electromagnetic compatibility
  Conformance with EMC directive
• Fire protection for rail vehicles (DIN EN 45545-2) R24
  HL 1 - HL 2
• DNV GL-Temperature
  B
• Height
  109.81 mm
Permissible humidity (operation)
5 % ... 95 % (non-condensing)
Transmitter supply voltage
15 V
Stripping length
10 mm
Degree of pollution
2
Color
gray
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 2
UL, USA/Canada
UL 508 Listed
DNV GL-EMC
A
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download area
Width
6.2 mm
Ambient temperature (operation)
-40 °C ... 70 °C
Max. output voltage
15 V DC
Connection method
Push-in connection
Maximum temperature coefficient
< 0.01 %/K
Noise emission
EN 61000-6-4
Housing material
PBT
Conformance
CE-compliant
Standards/regulations
GB 3836.1
Voltage input signal
9.6 V DC ... 30 V DC
Noise immunity
EN 61000-6-2 When being exposed to interference, there may be minimal deviations.
Short-circuit current
> 35 mA
Ripple
< 20 mVPP (at 600 Ω)
Conductor cross section flexible
0.14 mm² ... 2.5 mm²
Overvoltage category
II
Electrical isolation
Reinforced insulation in accordance with IEC 61010-1
Mounting position
any
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 2
ATEX
 II 3 G Ex nA IIC T4 Gc X
DNV GL-Humidity
B
Depth
119.2 mm
Degree of protection
IP20 (not assessed by UL)
Output current
≤ 30 mA
Typical current consumption
< 38.2 mA (24 V)
Power consumption
< 900 mW (9.6 V DC)
Conductor cross section AWG
24 ... 12 (flexible)
Test voltage, input/output/supply
3 kV (50 Hz, 1 min.)
Assembly instructions
The T connector can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715.
Designation
GB Standard
REACh SVHC
Lead 7439-92-1