1032527 Phoenix Contact Control Relays

Product Details

• Type of note
  Notes on operation
• Height
  28 mm
• Maximum altitude
  ≤ 2000 m
• Typical release time
  10 ms
• Status display
  Yellow LED (bidirectional)
• Maximum switching voltage
  250 V AC/DC
• Note
  Do not use to separate SELV / PELV circuits from other circuits, because safe isolation is not guaranteed.
• Ambient temperature (storage/transport)
  -40 °C ... 70 °C
• Degree of protection
  RT II
• Typical response time
  15 ms
• Type of switch contact
  Single contact
• Minimum switching voltage
  12 V (10 mA)
• Limiting continuous current
  6 A
• Operating mode
  100% operating factor
• Mounting position
  any
• Designation
  Corrosive gas test
• Rated insulation voltage
  250 V AC
• Overvoltage category
  III
• ECLASS 11.0
  27371601
• ECLASS 6.0
  27371600
ECLASS 9.0
27371601
Width
22.5 mm
Ambient temperature (operation)
-40 °C ... 70 °C
Typical input current at UN
32 mA
Contact type
4 changeover contacts
Min. switching current
10 mA (12 V)
Interrupting rating (ohmic load) max.
144 W (24 V DC)
Test voltage
2.5 kVrms (50 Hz, 1 min., winding/contact)
Mechanical service life
3x 107 cycles
Standards/regulations
EN 61810-1
Pollution degree
2
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
Identification
ISA-S71.04. G3 Harsh Group
ECLASS 5.1
27371600
ECLASS 7.0
27371601
ETIM 7.0
EC001437
Depth
35.5 mm
Nominal input voltage UN
24 V DC
Coil voltage
24 V DC
Power dissipation for nominal condition
759 mW
Contact material
AgNi
Maximum inrush current
12 A (20 ms, N/O contacts)
Switching capacity min.
120 mW
Service life, electrical
see diagram
Assembly instructions
In rows with zero spacing
Rated surge voltage
5 kV
Insulation
Basic insulation
ECLASS 10.0.1
27371601
ECLASS 5.0
27371600
ETIM 6.0
EC001437