1032521 Phoenix Contact Control Relays

Product Details

• Type of note
  Notes on operation
• Maximum altitude
  ≤ 2000 m
• Typical input current at UN
  31 mA
• Minimum switching voltage
  12 V (10 mA)
• Maximum inrush current
  12 A (20 ms, N/O contacts)
• Mechanical service life
  3x 107 cycles
• Service life, electrical
  see diagram
• Standards/regulations
  EN 61810-1
• Pollution degree
  2
• China RoHS
  Environmentally friendly use period: unlimited = EFUP-e
• ECLASS 7.0
  27371601
• Ambient temperature (storage/transport)
  -40 °C ... 70 °C
• Nominal input voltage UN
  24 V DC
• Power dissipation for nominal condition
  741 mW
• Type of switch contact
  Single contact
• Maximum switching voltage
  250 V AC/DC
• Limiting continuous current
  6 A
• Designation
  Corrosive gas test
• Rated surge voltage
  5 kV
• Overvoltage category
  III
ECLASS 11.0
27371601
ECLASS 9.0
27371601
Note
Do not use to separate SELV / PELV circuits from other circuits, because safe isolation is not guaranteed.
Degree of protection
RT II
Coil voltage
24 V DC
Contact type
4 changeover contacts
Min. switching current
10 mA (12 V)
Switching capacity min.
120 mW
Test voltage
2.5 kVrms (50 Hz, 1 min., winding/contact)
Assembly instructions
In rows with zero spacing
Rated insulation voltage
250 V AC
ECLASS 10.0.1
27371601
ECLASS 6.0
27371600
ETIM 7.0
EC001437
Ambient temperature (operation)
-40 °C ... 70 °C
Typical response time
15 ms
Typical release time
10 ms
Contact material
AgNi
Interrupting rating (ohmic load) max.
144 W (24 V DC)
Operating mode
100% operating factor
Mounting position
any
Insulation
Basic insulation
Identification
ISA-S71.04. G3 Harsh Group
ECLASS 5.1
27371600
ETIM 6.0
EC001437
ECLASS 5.0
27371600