1029252 Phoenix Contact Terminal Blocks

Product Details

• Result of the test for mechanical stability of terminal points (5 x conductor connection)
  Test passed
• Insulating material
  PC
• Maximum load current
  24 A
• Shock protection test specification
  DIN EN 50274 (VDE 0660-514):2002-11
• Flammability rating according to UL 94
  V0
• Overvoltage category
  III
• Note regarding shock protection
  Back of hand protection without cable lug, as well as with insulated and uninsulated cable lugs with shrink sleeve with tightened clamping screw.
• Tensile test result
  Test passed
• Tractive force setpoint
  50 N
• ECLASS 4.0
  27141118
• Color
  gray
• Connection
  1 level
• Internal cylindrical gage
  A5
• Rated surge voltage
  4 kV
• Nominal current IN
  24 A
• Result of power-frequency withstand voltage test
  Test passed
• Result of tight fit on support
  Test passed
• Result of aging test
  Test passed
• Insulating material group
  I
• Nominal voltage UN
  400 V
Result of surge voltage test
Test passed
Bending test conductor cross section/weight
2.5 mm² / 0.7 kg
Requirement temperature-rise test
45 K
Result of thermal test
Test passed
Tightening torque, min
1 Nm
Mounting type
Wall mounting
Nominal cross section
4 mm²
Test surge voltage
5 kV
Open side panel
No
Back of the hand protection
guaranteed
Power frequency withstand voltage setpoint
2 kV
Result of flexion and pull-out test
Test passed
Conductor cross section tensile test
2 mm²
Tightening torque max
1.3 Nm
Ageing test for screwless modular terminal block temperature cycles
192
Connection method
Ring cable lug
Surge voltage test setpoint
5 kV
Short circuit stability result
Test passed
Min. AWG conductor cross section, flexible
24
Hole diameter, min.
3.7 mm
Additional text
Type RS PRO Order No. 267-3919, vertical crimping
Conductor cross section flexible min.
0.5 mm²
Cable lug connection according to standard
DIN 46237:1970-07
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 6.0
27141100
ETIM 4.0
EC000897
UNSPSC 7.0901
39121410
UNSPSC 13.2
39121410
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Conductor cross section flexible max.
6 mm²
Bolt diameter
3.5 mm
ECLASS 5.0
27141118
ECLASS 7.0
27141126
Connection in acc. with standard
IEC 60947-7-1
Min. cross section for cable lug connection
4 mm²
Cable lug width, max.
7.2 mm
Ambient temperature (storage/transport)
-25 °C ... 55 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Max. AWG conductor cross section, flexible
10
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 11.0
27141126
Max. cross section for cable lug connection
6 mm²
UNSPSC 19.0
39121410
ECLASS 5.1
27141100
UNSPSC 18.0
39121410
ECLASS 9.0
27141126
UNSPSC 12.01
39121410
Operating temperature
-60 °C ... 85 °C
Ambient temperature (assembly)
-5 °C ... 70 °C
ETIM 7.0
EC000902
UNSPSC 11
39121410
UNSPSC 20.0
39121410
ECLASS 10.0.1
27141126
ECLASS 4.1
27141118
ETIM 6.0
EC000902
UNSPSC 6.01
30211811
UNSPSC 21.0
39121410