1015533 Phoenix Contact Electrical Safety Devices

Product Details

• Height
  112.2 mm
• Max. permissible relative humidity (operation)
  75 % (on average, 85% infrequently, non-condensing)
• Designation
  Air clearances and creepage distances between the power circuits
• Input name
  Start circuit
• ETIM 7.0
  EC001449
• Depth
  114.5 mm
• Inrush current
  min. 3 mA
• Power consumption at US
  typ. 1.92 W
• Input current range "0" signal
  0 mA ... 2 mA
• Limit frequency
  min. 0 Hz
• Output description
  PNP
• Switching voltage
  min. 12 V AC/DC
• Contact material
  AgSnO2
• Switching capacity
  min. 60 mW
• Output fuse
  6 A gL/gG
• Short-circuit protection
  Yes
• Nominal operating mode
  100% operating factor
• Mounting position
  vertical or horizontal
• Min. degree of protection of inst. location
  IP54
• Assembly instructions
  See derating curve
pluggable
Yes
Connection method
Screw connection
Screw thread
M3
Safety Integrity Level (SIL)
3
Standards/regulations
DIN EN 50178
Rated insulation voltage
250 V AC
Overvoltage category
III
ECLASS 9.0
27371819
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download area
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Rated control supply current IS
typ. 80 mA
Description of the input
non-safety-related
Input voltage range "1" signal
11 V DC ... 30 V DC
Protective circuit/component
Suppressor diode
Contact type
5 enabling current paths
Sq. Total current
108 A2 (observe derating)
Switching capacity according to IEC 60947-5-1
4 A (24 V (DC13))
Current
max. 100 mA
Typical response time at US
< 40 ms (automatic start)
Restart time
< 1 s (Boot time)
Recovery time
500 ms (following demand of the safety function)
Mounting type
DIN rail mounting
Housing material
PBT
Status display
5 x bi-color LED
Stripping length
7 mm
Conductor cross section flexible
0.2 mm² ... 2.5 mm²
Torque
0.5 Nm ... 0.6 Nm
Performance level (PL)
e (4 A DC13; 5 A AC15; 8760 switching cycles/year)
Degree of pollution
2
ECLASS 10.0.1
27371819
ECLASS 11.0
27371819
Width
22.5 mm
Max. permissible humidity (storage/transport)
75 % (on average, 85% infrequently, non-condensing)
Rated control circuit supply voltage US
24 V DC -20 % / +25 %
Protective circuit
Serial protection against polarity reversal Suppressor diode
Input voltage range "0" signal
0 V DC ... 5 V DC
Max. permissible overall conductor resistance
150 Ω
Number of outputs
2
Switching frequency
0.5 Hz (depending on the set delay time)
Voltage
corresponds to US
Cable length
max. 150 m
Delay time range
0.2 s ... 300 s ±5 % (can be set for 47/48/58)
Typical release time at US
< 25 ms (when controlled via S12 and S22 (only for undelayed contacts))
Category
4
Vibration (operation)
10 Hz ... 150 Hz, 2g
China RoHS
Environmentally Friendly Use Period = 50 years
ETIM 6.0
EC001449
Ambient temperature (operation)
-35 °C ... 60 °C (observe derating)
Maximum altitude
≤ 2000 m (Above sea level)
Filter time
max. 3 ms (Test pulse width of low test pulses)
Number of inputs
1
Current consumption
< 3.2 mA (typically with US)
Concurrence
∞
Output name
Enabling current paths
Limiting continuous current
6 A
Mechanical service life
10x 106 cycles
Maximum inrush current
500 mA (Δt = 10 ms at Us)
Typical pickup time at US
500 ms (with Us when controlled via A1)
Net weight
155.43 g
Relay type
Electromechanical relay with force-guided contacts in accordance with IEC/EN 61810-3
Degree of protection
IP20
Housing color
yellow
Conductor cross section solid
0.2 mm² ... 2.5 mm²
Conductor cross-section AWG
24 ... 12
Stop category
0
Safety Integrity Level Claim Limit (SIL CL)
3
Rated surge voltage/insulation
Basic insulation 4 kV between all current paths and housing
Shock
10g (operation), 15g (transport)
Conformance
CE-compliant
REACh SVHC
Lead 7439-92-1