1007352 Phoenix Contact Programmable Logic Controllers

Product Details

• Transmission speed
  100 Mbps
• Current consumption
  max. 1.1 A
• Number of outputs
  2
• Nominal output voltage
  24 V (UO - 1.1 V)
• Depth
  54 mm
• Permissible humidity (operation)
  5 % ... 95 % (non-condensing)
• Air pressure (operation)
  70 kPa ... 106 kPa (up to 3000 m above sea level)
• Color
  traffic grey A RAL 7042
• Mounting position
  any (no temperature derating)
• Power consumption
  max. 33 W (of which 1.3 W internal losses)
• ECLASS 11.0
  27242605
• ETIM 6.0
  EC001601
• Number
  2
• Note on weight specifications
  with connectors and bus base module
• Supply voltage
  24 V DC
• Protective circuit
  Surge protection electronic (35 V, 0.5 s)
• Frequency range
  0 Hz ... 65535 Hz
• Mechanical tests
  Vibration resistance in acc. with EN 60068-2-6/IEC 60068-2-6 5g
• Operating mode
  PWM, pulse generator, push-pull output
• Ambient temperature (operation)
  -25 °C ... 60 °C
Degree of protection
IP20
Nominal current IN
max. 500 mA (at 24 V DC)
Short-circuit-proof
yes
Immunity to surge
Noise immunity test in accordance with EN 61000-6-2 Transient overvoltage (surge) EN 61000-4-5/IEC 61000-4-5 Criterion B, DC supply lines: ±0.5 kV/±0.5 kV (symmetrical/asymmetrical)
Mounting type
DIN rail
Air pressure (storage/transport)
70 kPa ... 106 kPa (up to 3000 m above sea level)
Interference emission
Noise emission test according to EN 61000-6-3 Class B
ECLASS 10.0.1
27242605
Width
35 mm
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Degree of pollution
2 (IEC 60664-1, EN 60664-1)
Pulse duty factor
0 % ... 100 %
Nominal load, lamp
max. 6 W (at nominal voltage)
Immunity to burst
Noise immunity test in accordance with EN 61000-6-2 Fast transients (burst) EN 61000-4-4/IEC 61000-4-4 Criterion B, 2 kV
Permissible humidity (storage/transport)
5 % ... 95 % (non-condensing)
Net weight
171.06 g
Connection method
Push-in connection
Height
126.1 mm
Note on dimensions
The depth is valid when a TH 35-7,5 DIN rail is used (according to EN 60715).
Designation
Supply voltage input UO
Supply voltage range
19.2 V DC ... 30 V DC including all tolerances, including ripple
Output name
PWM outputs
Connection technology
2-conductor
Nominal load, ohmic
max. 12 W (at 24 V DC nominal voltage)
Short-circuit current
typ. 24 mA (5 V output)
Protection class
III (IEC 61140, EN 61140, VDE 0140-1)
Immunity to conducted interference
Noise immunity test in accordance with EN 61000-6-2 Conducted interference EN 61000-4-6/IEC 61000-4-6 Criterion A, Test voltage 10 V
Immunity to ESD
Noise immunity test in accordance with EN 61000-6-2 Electrostatic discharge (ESD) EN 61000-4-2/IEC 61000-4-2 Criterion B, 6 kV contact discharge, 8 kV air discharge
REACh SVHC
Lead 7439-92-1
ECLASS 9.0
27242605
Transient surge protection
yes
Immunity to EF
Noise immunity test in accordance with EN 61000-6-2 Electromagnetic fields EN 61000-4-3/IEC 61000-4-3 Criterion A, Field intensity: 10 V/m
Nominal load, inductive
max. 12 VA (at 24 V DC nominal voltage)
Overvoltage category
II (IEC 60664-1, EN 60664-1)
ECLASS 7.0
27242605
ETIM 7.0
EC001601
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 6.0
27242600