1004925 Phoenix Contact Programmable Logic Controllers
Part#:1004925
Manufacturer:Phoenix Contact
Category:Programmable Logic Controllers
Product Lifecycle:Active
Get a quick Quote!
Axioline F, Digital output module, Digital outputs: 32, 24 V DC, 500 mA, connection method: 1-conductor, transmission speed in the local bus: 100 Mbps, degree of protection: IP20, including bus base module and Axioline F connectors
About the manufacturer: Phoenix Contact is one of the manufacturers that offers Programmable Logic Controllers that you can order at Power Resources International site. Phoenix Contact manufactures industrial electrical and electronic technology products that offer power, protection, connectivity, and automation for systems and equipment.
Check out the 1004925 Phoenix Contact price in the box on the right side or send a quick quote.
Product Details
- Caption Dimensions
- Height 129.9 mm
- Note on dimensions The depth is valid when a TH 35-7,5 DIN rail is used (according to EN 60715).
- Ambient temperature (operation) -25 °C ... 60 °C
- Nominal load, inductive max. 12 VA (1.2 H, 48 Ω, with nominal voltage)
- Output current when switched off max. 300 µA
- Behavior with inductive overload Output can be destroyed
- Immunity to ESD Noise immunity test in accordance with EN 61000-6-2 Electrostatic discharge (ESD) EN 61000-4-2/IEC 61000-4-2 Criterion B, 6 kV contact discharge, 8 kV air discharge
- Protection class III (IEC 61140, EN 61140, VDE 0140-1)
- Overvoltage category II (IEC 60664-1, EN 60664-1)
- China RoHS Environmentally Friendly Use Period = 50 years
- ETIM 7.0 EC001599
- Power consumption max. 480 W (of which 2.4 W constitute internal losses)
- Protection max. 16 A (polarity reversal protection up to 5 A)
- Output voltage 24 V DC
- Nominal load, ohmic max. 12 W (48 Ω, with nominal voltage)
- Load min. 10 kΩ
- Output voltage when switched off max. 1 V
- Ambient temperature (storage/transport) -40 °C ... 85 °C
- Air pressure (storage/transport) 70 kPa ... 106 kPa (up to 3000 m above sea level)
- Degree of protection IP20
- Permissible humidity (storage/transport) 5 % ... 95 % (non-condensing)
- Connection method Push-in connection
- Conductor cross section solid min. 0.2 mm²
- Conductor cross section AWG min. 24
- Conductor cross section flexible min. 0.2 mm²
- Mounting type DIN rail
- Mounting position any (no temperature derating)
- Transmission speed 100 Mbps
- Width 35 mm
- Depth 54 mm
- Permissible humidity (operation) 5 % ... 95 % (non-condensing)
- Note on the connection method Please observe the information provided on conductor cross sections in the “Axioline F: system and installation” user manual.
- Conductor cross section flexible max. 1.5 mm²
- Stripping length 8 mm
- Color traffic grey A RAL 7042
- Note on weight specifications with connectors and bus base module
- Supply voltage 24 V DC
- Current consumption max. 16 A (Provide external protection; if the total current of 8 A is exceeded, connect the supply at the power connector parallel via both terminal points.)
- Protective circuit Short-circuit protection, overload protection of the outputs electronic
- Connection technology 1-conductor
- Nominal output voltage 24 V DC
- Behavior with overload Shutdown with automatic restart
- Nominal load, lamp max. 12 W (at nominal voltage)
- Test section 5 V supply of the local bus (UBus) / 24 V supply (I/Os) 500 V AC 50 Hz 1 min.
- Immunity to burst Noise immunity test in accordance with EN 61000-6-2 Fast transients (burst) EN 61000-4-4/IEC 61000-4-4 Criterion B, 2 kV
- Interference emission Noise emission test according to EN 61000-6-3 Class B
- REACh SVHC Lead 7439-92-1
- ECLASS 11.0 27242604
- Air pressure (operation) 70 kPa ... 106 kPa (up to 3000 m above sea level)
- Designation Supply for digital output modules (UO)
- Conductor cross section solid max. 1.5 mm²
- Conductor cross section AWG max. 16
- Net weight 159 g
- Number 2
- Degree of pollution 2 (IEC 60664-1, EN 60664-1)
- Supply voltage range 19.2 V DC ... 30 V DC (including all tolerances, including ripple)
- Output name Digital outputs
- Number of outputs 32
- Switching frequency max. 5500 per second (with ohmic load)
- Mechanical tests Vibration resistance in acc. with EN 60068-2-6/IEC 60068-2-6 5g
- ETIM 6.0 EC001599
- ECLASS 10.0.1 27242604
- ECLASS 9.0 27242604
- ECLASS 6.0 27242600
- Immunity to EF Noise immunity test in accordance with EN 61000-6-2 Electromagnetic fields EN 61000-4-3/IEC 61000-4-3 Criterion A, Field intensity: 10 V/m
- Immunity to conducted interference Noise immunity test in accordance with EN 61000-6-2 Conducted interference EN 61000-4-6/IEC 61000-4-6 Criterion A, Test voltage 10 V
- Reverse voltage resistance to short pulses limited protection up to 0.5 A for 1 s
- Immunity to surge Noise immunity test in accordance with EN 61000-6-2 Transient overvoltage (surge) EN 61000-4-5/IEC 61000-4-5 Criterion B, DC supply lines: ±0.5 kV/±0.5 kV (symmetrical/asymmetrical)
- ECLASS 7.0 27242604
Product condition
New Factory Sealed
New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.
Manufacturer warranty
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
Select Qty:
Average response time: 11 minutes
Fast Shipping & Delivery
Secure Payment Processing
Warranty
Responsive Customer Support
Need more details?
Feel free to chat with us
What can I help you find today?