0719252 Phoenix Contact Terminal Blocks

Product Details

• Color
  brown
• Insulating material group
  I
• Nominal current IN
  24 A
• Result of surge voltage test
  Test passed
• Result of the test for mechanical stability of terminal points (5 x conductor connection)
  Test passed
• Tensile test result
  Test passed
• Height NS 35/15
  49.5 mm
• Tightening torque max
  0.8 Nm
• Conductor cross section AWG min.
  24
• Conductor cross section flexible, with ferrule without plastic sleeve min.
  0.25 mm²
• Cross section with insertion bridge, stranded max.
  2.5 mm²
• 2 conductors with same cross section, stranded max.
  1 mm²
• Ambient temperature (assembly)
  -5 °C ... 70 °C
• ECLASS 11.0
  27141120
• ECLASS 5.1
  27141100
• ETIM 2.0
  EC000897
• ETIM 7.0
  EC000897
• UNSPSC 11
  39121410
• UNSPSC 19.0
  39121410
• Requirement temperature-rise test
  Increase in temperature ≤ 45 K
Short-time current
0.48 kA
Power frequency withstand voltage setpoint
2 kV
Bending test turns
135
Result of voltage-drop test
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Height NS 32
47 mm
Conductor cross section solid max.
4 mm²
Conductor cross section flexible min.
0.2 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.25 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
2.5 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
1 mm²
Ambient temperature (actuation)
-5 °C ... 70 °C
UNSPSC 21.0
39121410
ECLASS 5.0
27141100
ECLASS 7.0
27141120
UNSPSC 6.01
30211811
Number of connections
2
Rated surge voltage
8 kV
Maximum power dissipation for nominal condition
0.77 W
Open side panel
Yes
Length
42.5 mm
Screw thread
M3
Stripping length
7 mm
Conductor cross section AWG max.
12
Conductor cross section flexible, with ferrule with plastic sleeve max.
1.5 mm²
2 conductors with same cross section, solid min.
0.2 mm²
Internal cylindrical gage
A3
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 4.0
27141100
ETIM 4.0
EC000897
UNSPSC 13.2
39121410
UNSPSC 20.0
39121410
Nominal cross section
2.5 mm²
Degree of pollution
3
Maximum load current
24 A (with a 2.5 mm² conductor cross section)
Back of the hand protection
guaranteed
Result of flexion and pull-out test
Test passed
Result of tight fit on support
Test passed
Result of thermal test
Test passed
Width
5.2 mm
End cover width
1.5 mm
Potentials
1
Flammability rating according to UL 94
V2
Nominal voltage UN
800 V
Result of power-frequency withstand voltage test
Test passed
2 conductors with same cross section, solid max.
1 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1.5 mm²
Operating temperature
-60 °C ... 85 °C
ECLASS 10.0.1
27141120
ECLASS 4.1
27141100
ECLASS 9.0
27141120
ETIM 3.0
EC000897
UNSPSC 7.0901
39121410
UNSPSC 18.0
39121410
Bending test conductor cross section/weight
0.2 mm² / 0.2 kg
Tight fit on carrier
NS 32/NS 35
Result of temperature-rise test
Test passed
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Height NS 35/7,5
42 mm
Connection method
Screw connection
Connection in acc. with standard
CSA
Conductor cross section flexible max.
2.5 mm²
Max. AWG conductor cross section, flexible
14
2 conductors with same cross section, stranded min.
0.2 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
0.25 mm²
Ambient temperature (storage/transport)
-25 °C ... 55 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 6.0
27141100
ETIM 6.0
EC000897
UNSPSC 12.01
39121410
Number of levels
1
Insulating material
PA
Overvoltage category
III
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Finger protection
guaranteed
Bending test rotation speed
10 rpm
Setpoint
1 N
Conductor cross section short circuit testing
4 mm²
Short circuit stability result
Test passed
Relative insulation material temperature index (Elec., UL 746 B)
125 °C
Tightening torque, min
0.6 Nm
Conductor cross section solid min.
0.2 mm²
Min. AWG conductor cross section, flexible
24
Cross section with insertion bridge, solid max.
2.5 mm²