0719126 Phoenix Contact Terminal Blocks

Product Details

• Bending test conductor cross section/weight
  0.2 mm² / 0.2 kg
• Oscillation, broadband noise test result
  Test passed
• Result of tight fit on support
  Test passed
• Test duration per axis
  5 h
• Test specification, oscillation, broadband noise
  DIN EN 50155 (VDE 0115-200):2008-03
• Test spectrum
  Service life test category 2, bogie-mounted
• Acceleration
  30g
• Shock duration
  18 ms
• Relative insulation material temperature index (Elec., UL 746 B)
  130 °C
• Smoke gas toxicity NFPA 130 (SMP 800C)
  passed
• Shock form
  Half-sine
• Specific optical density of smoke NFPA 130 (ASTM E 662)
  passed
• Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
  125 °C
• Calorimetric heat release NFPA 130 (ASTM E 1354)
  27,5 MJ/kg
• Rated surge voltage
  8 kV
• Test frequency
  f1 = 5 Hz to f2 = 250 Hz
• Shock test result
  Test passed
• Number of shocks per direction
  3
• Requirement temperature-rise test
  Increase in temperature ≤ 45 K
• Surface flammability NFPA 130 (ASTM E 162)
  passed
Maximum load current
32 A (with 4 mm² conductor cross section)
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
ETIM 4.0
EC000897
REACh SVHC
Lead 7439-92-1
ECLASS 4.0
27141100
Number of levels
1
Insulating material
PA
Insulating material group
I
Nominal voltage UN
800 V
Result of power-frequency withstand voltage test
Test passed
Tensile test result
Test passed
Setpoint
1 N
Result of thermal test
Test passed
ASD level
6.12 (m/s2)2/Hz
Tightening torque max
0.8 Nm
Conductor cross section solid max.
4 mm²
Conductor cross section AWG min.
24
Cross section with insertion bridge, stranded max.
2.5 mm²
2 conductors with same cross section, stranded min.
0.2 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
1.5 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Number of connections
2
Overvoltage category
III
Length
42.5 mm
Height NS 32
52 mm
Connection in acc. with standard
CUL
Min. AWG conductor cross section, flexible
24
Conductor cross section flexible, with ferrule without plastic sleeve max.
2.5 mm²
Cross section with insertion bridge, solid max.
4 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
0.25 mm²
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 10.0.1
27141120
ECLASS 5.0
27141100
ECLASS 7.0
27141120
ETIM 7.0
EC000897
Shock protection test specification
IEC 60529:2001-02
UNSPSC 11
39121410
Color
yellow
UNSPSC 21.0
39121410
Height NS 35/15
54.5 mm
Stripping length
8 mm
Conductor cross section flexible max.
2.5 mm²
Max. AWG conductor cross section, flexible
14
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.25 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 6.0
27141100
ETIM 2.0
EC000897
ECLASS 9.0
27141120
UNSPSC 7.0901
39121410
2 conductors with same cross section, stranded max.
1.5 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1 mm²
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 11.0
27141120
Connection method
Screw connection
Screw thread
M3
Conductor cross section flexible min.
0.2 mm²
Conductor cross section AWG max.
12
Conductor cross section flexible, with ferrule with plastic sleeve max.
1.5 mm²
ECLASS 5.1
27141100
UNSPSC 20.0
39121410
UNSPSC 13.2
39121410
Degree of pollution
3
Nominal current IN
24 A
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Tightening torque, min
0.6 Nm
Conductor cross section solid min.
0.2 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.25 mm²
2 conductors with same cross section, solid min.
0.2 mm²
2 conductors with same cross section, solid max.
1.5 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 4.1
27141100
ETIM 6.0
EC000897
ETIM 3.0
EC000897
UNSPSC 12.01
39121410
UNSPSC 6.01
30211811
UNSPSC 18.0
39121410
UNSPSC 19.0
39121410
Finger protection
guaranteed
Bending test rotation speed
10 rpm
Short circuit stability result
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Test directions
X-, Y- and Z-axis (pos. and neg.)
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Result of flexion and pull-out test
Test passed
Result of voltage-drop test
Test passed
Conductor cross section short circuit testing
4 mm²
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Result of surge voltage test
Test passed
Back of the hand protection
guaranteed
Bending test turns
135
Tight fit on carrier
NS 32/NS 35
Result of temperature-rise test
Test passed
Short-time current
0.48 kA
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Height NS 35/7,5
47 mm
Potentials
1
Flammability rating according to UL 94
V0
Maximum power dissipation for nominal condition
0.77 W
Open side panel
Yes
Power frequency withstand voltage setpoint
2 kV
Width
5.2 mm
Nominal cross section
2.5 mm²