0311142 Phoenix Contact Terminal Blocks

Product Details

• Short circuit stability result
  Test passed
• Number of connections
  2
• Nominal cross section
  6 mm²
• Insulating material group
  I
• Nominal voltage UN
  500 V
• Result of power-frequency withstand voltage test
  Test passed
• Bending test rotation speed
  10 rpm
• Temperature-rise test
  Test passed
• Proof of thermal characteristics (needle flame) effective duration
  30 s
• Test duration per axis
  5 h
• Specific optical density of smoke NFPA 130 (ASTM E 662)
  passed
• Surface flammability NFPA 130 (ASTM E 162)
  passed
• Fire protection for rail vehicles (DIN EN 45545-2) R26
  HL 1 - HL 3
• Insulating material
  PA
• Degree of pollution
  3
• Maximum power dissipation for nominal condition
  1.31 W
• Open side panel
  No
• Power frequency withstand voltage setpoint
  1.89 kV
• Test frequency
  f1 = 5 Hz to f2 = 250 Hz
• Test specification, oscillation, broadband noise
  DIN EN 50155 (VDE 0115-200):2018-05
Static insulating material application in cold
-60 °C
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Length
99.5 mm
Conductor cross section solid min.
0.5 mm²
Conductor cross section AWG max.
8
Flammability rating according to UL 94
V0
Rated surge voltage
6 kV
Maximum load current
50 A (with 10 mm² conductor cross section)
Result of surge voltage test
Test passed
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Bending test conductor cross section/weight
0.5 mm² / 0.3 kg
Result of thermal test
Test passed
Test spectrum
Service life test category 2, bogie-mounted
Shock form
Semi-sinusoidal
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Width
8.2 mm
Conductor cross section flexible min.
0.5 mm²
Conductor cross section flexible max.
6 mm²
ECLASS 11.0
27141120
Number of levels
1
Overvoltage category
III
Nominal current IN
41 A
Back of the hand protection
guaranteed
Bending test turns
135
Setpoint
5 N
Conductor cross section short circuit testing
6 mm²
ASD level
6.12 (m/s2)2/Hz
Test directions
X-, Y- and Z-axis (pos. and neg.)
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Height NS 35/15
66.5 mm
Conductor cross section solid max.
10 mm²
Conductor cross section AWG min.
20
2 conductors with same cross section, stranded min.
0.5 mm²
Connection method
Screw connection
Tightening torque, min
1.5 Nm
ECLASS 5.1
27141100
Color
gray
Connection in acc. with standard
IEC 60947-7-1
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Result of flexion and pull-out test
Test passed
Tight fit on carrier
NS 32/NS 35
Result of tight fit on support
Test passed
Short-time current
0.72 kA
Acceleration
30g
Shock duration
18 ms
Number of shocks per direction
3
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Height NS 32
64 mm
Height NS 35/7,5
59 mm
Conductor cross section flexible, with ferrule with plastic sleeve max.
6 mm²
2 conductors with same cross section, stranded max.
4 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
4 mm²
Ambient temperature (actuation)
-5 °C ... 70 °C
China RoHS
Environmentally Friendly Use Period = 50 years
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.5 mm²
2 conductors with same cross section, solid max.
2.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.5 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
0.5 mm²
Stripping length
11 mm
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
ECLASS 5.0
27141100
Conductor cross section flexible, with ferrule without plastic sleeve max.
6 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
ETIM 3.0
EC000902
UNSPSC 11
39121410
UNSPSC 13.2
39121410
2 conductors with same cross section, solid min.
0.5 mm²
Tightening torque max
1.8 Nm
ETIM 2.0
EC000902
ETIM 7.0
EC000902
UNSPSC 19.0
39121410
Screw thread
M4
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 10.0.1
27141120
ECLASS 7.0
27141126
ETIM 4.0
EC000902
UNSPSC 7.0901
39121410
UNSPSC 20.0
39121410
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 4.0
27141100
ECLASS 6.0
27141100
ETIM 6.0
EC000902
UNSPSC 12.01
39121410
UNSPSC 21.0
39121410
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
2.5 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
ECLASS 4.1
27141100
UNSPSC 6.01
30211811
UNSPSC 18.0
39121410
ECLASS 9.0
27141120